The motor unit twitch torque is modified by sustained contraction, but the association to changes in muscle fiber electrophysiological properties is not fully known. Thus twitch torque, muscle fiber conduction velocity, and action potential properties of single motor units were assessed in 11 subjects following an isometric submaximal contraction of the tibialis anterior muscle until endurance. The volunteers activated a target motor unit at the minimum discharge rate in eight 3-min-long contractions, three before and five after an isometric contraction at 40% of the maximal torque, sustained until endurance. Multichannel surface electromyogram signals and joint torque were averaged with the target motor unit potential as trigger. Discharge rate (mean ± SE, 6.6 ± 0.2 pulses/s) and interpulse interval variability (33.3 ± 7.0%) were not different in the eight contractions. Peak twitch torque and recruitment threshold increased significantly (93 ± 29 and 12 ± 5%, P < 0.05) in the contraction immediately after the endurance task with respect to the preendurance values (0.94 ± 0.26 mN·m and 3.7 ± 0.5% of the maximal torque), whereas time to peak of the twitch torque did not change (74.4 ± 10.1 ms). Muscle fiber conduction velocity decreased and action potential duration increased in the contraction after the endurance (6.3 ± 1.8 and 9.8 ± 1.8%, respectively, P < 0.05; preendurance values, 3.9 ± 0.2 m/s and 11.1 ± 0.8 ms), whereas the surface potential peak-to-peak amplitude did not change (27.1 ± 3.1 μV). There was no significant correlation between the relative changes in muscle fiber conduction velocity or surface potential duration and in peak twitch torque ( R2 = 0.04 and 0.10, respectively). In conclusion, modifications in peak twitch torque of low-threshold motor units with sustained contraction are mainly determined by mechanisms not related to changes in action potential shape and in its propagation velocity.
Muscle fiber conduction velocity during isometric contraction
