KAISER ALLOY 7075

Alloy Digest ◽  
2019 ◽  
Vol 68 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Kaiser Aluminum

Abstract Kaiser Alloy 7075 in pipe and tube is used in hydraulic lines. This alloy is covered in Alloy Digest Al-368, March 2000, but that datasheet is for screw machining bar stock whereas this one includes tube and pipe data. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as joining. Filing Code: Al-457. Producer or source: Kaiser Aluminum Corporation.

KAISER ALUMINUM ALLOY 6033

Alloy Digest ◽  
2003 ◽  
Vol 52 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6033 has improved machinability over alloy 6061 with an addition of bismuth. The alloy also has a good anodizing response and higher strength than alloy 6061. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-386. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALUMINUM ALLOY 6262

Alloy Digest ◽  
1999 ◽  
Vol 48 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Automotive Parts

Abstract Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALLOY 6063

Alloy Digest ◽  
2011 ◽  
Vol 60 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Kaiser Aluminum ◽  
Silicon Alloy ◽  
Good Corrosion Resistance

Abstract Kaiser Alloy 6063 is a magnesium/silicon alloy. One of the most popular of the heat treatable alloy group. Products include extruded and drawn tube, pipe, rod, bar, and profiles. This alloy has good corrosion resistance, good weldability, and a good anodizing response. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Al-436. Producer or source: Kaiser Aluminum. See also Alloy Digest Al-458, July 2019.

KAISER ALLOY 7003

Alloy Digest ◽  
2010 ◽  
Vol 59 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Kaiser Aluminum ◽  
Medium Strength ◽  
Strength Alloy

Abstract Kaiser Alloy 7003 is a medium strength alloy originally developed in Japan. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming and joining. Filing Code: AL-434. Producer or source: Kaiser Aluminum.

KAISER ALLOY 6082

Alloy Digest ◽  
2010 ◽  
Vol 59 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Kaiser Aluminum ◽  
Good Corrosion Resistance ◽  
Strength Alloy

Abstract Kaiser Alloy 6082 is a high strength alloy used in structures requiring good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: AL-433. Producer or source: Kaiser Aluminum.

KAISER ALLOY 3

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Kaiser Aluminum

Abstract Kaiser Alloy 3003 is a general engineering alloy produced as tubing. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Al-452. Producer or source: Kaiser Aluminum Corporation.

KAISER ALLOY 6005

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pressure Vessel ◽  
Kaiser Aluminum ◽  
Vessel Material

Abstract Kaiser Alloy 6005 is a pressure vessel material with corrosion resistance and weldability. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: AL-431. Producer or source: Kaiser Aluminum.

KAISER ALLOY K211

Alloy Digest ◽  
2018 ◽  
Vol 67 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum

Abstract Kaiser Alloy K211 is a rod and bar alloy that is RoHS compliant (2011). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Al-456. Producer or source: Kaiser Aluminum Corporation.

KAISER ALUMINUM ALLOY 2014

Alloy Digest ◽  
1998 ◽  
Vol 47 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Screw Machine

Abstract Kaiser Aluminum alloy 2014 is one of the strongest heat-treatable alloys for screw machine applications. The alloy has good machinability and high strength. Corrosion resistance is only fair. Weldability is good with arc and resistance methods. In many applications, this alloy can be substituted for 2024. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-354. Producer or source: Kaiser Aluminum Corporation.

KAISER ALUMINUM ALLOY 2011

Alloy Digest ◽  
1998 ◽  
Vol 47 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Screw Machine

Abstract Kaiser Aluminum alloy 2011 is one of the most popular screw machine stock alloys available. Tennalum, a division of Kaiser Aluminum, produces alloy 2011 in the T3 temper as Microchip II, which offers excellent machinability and surface finish. The chips from Tennalum’s Microchip II (T3 temper only) are known for being small in size. Alloy 2011 is typically used in connectors and fittings, brake pistons, computer parts, knobs, and meter shafts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-352. Producer or source: Kaiser Aluminum Corporation.

Sign in / Sign up

Export Citation Format

Share Document