RAFFMETAL EN AB-Al Si7Mg0.6 (EN AB-42200)

Raffmetal EN AB-Al Si7Mg0.6 (EN AB-42200) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold, and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-483. Producer or source: Raffmetal S.p.A.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2243

Deutsche Edelstahlwerke Cryodur 2243 is a high-carbon, chromium-silicon-vanadium alloy cold-work tool steel that is suitable for applications requiring a combination of high strength, high toughness, and good wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting and heat treating. Filing Code: TS-821. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH & Co.

SMITHS Ti-6Al-2Sn-4Zr-2Mo-Si

Smiths Ti-6Al-2Sn-4Zr-2Mo-Si is a near-alpha titanium alloy that was developed for use at elevated temperatures. It exhibits high strength and toughness, excellent creep resistance, and high temperature stability at temperatures up 550 °C (1020 °F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, and joining. Filing Code: Ti-185. Producer or source: Smiths Metal Centres Limited.

UGITECH UGI HT605

Ugitech UGI HT605 (UNS R30605) is a solid solution strengthened, wrought cobalt-chromium-tungsten-nickel alloy with excellent high-temperature strength and excellent oxidation resistance up to 1095 °C (2000 °F). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-143. Producer or source: Ugitech SA (member of Swiss Steel Group).

OUTOKUMPU MODA 409/4512

Outokumpu Moda 409/4512 is a weldable, titanium-stabilized 11.5% chromium ferritic stainless steel with good oxidation resistance in dry air. Because of its titanium alloying, Outokumpu Moda 409/4512 can be welded in all dimensions without becoming susceptible to intergranular corrosion. It is possible to use Outokumpu Moda 409/4512 at elevated temperatures, for example in automotive exhaust systems, where it is often used to replace aluminum-coated carbon steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-1342. Producer or source: Outokumpu Oyj.

VDM NICKEL 200

VDM Nickel 200 is an unalloyed nickel grade that contains at least 99.2% nickel. It has characteristics that are useful in several fields, notably chemical processing and electronics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-778. Producer or source: VDM Metals GmbH (a subsidiary of Acerinox, S.A.).

WIELAND C24000

Wieland C24000, also known as low brass, is an 80Cu-20Zn alloy. Low brass, named for its relatively low zinc content, is a choice of many design engineers for applications where strength and formability are required. Due to its higher zinc content (compared to red brass), low brass develops a beautiful antique brass color when chemically treated, making it ideal for many decorative or architectural applications. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as casting and heat treating. Filing Code: Cu-927. Producer or source: Wieland Rolled Products NA (formerly Olin Brass).

DURA-BAR 65-45-12X

Dura-Bar 65-45-12X is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite and a matrix comprising ferrite and 10–50% pearlite. The predominantly ferritic matrix of Dura-Bar 65-45-12X allows it to be easily machined as opposed to steels and pearlitic irons. Dura-Bar 65-45-12X is a suitable alternative to low and medium carbon non-alloy steels. It is appropriate for applications necessitating fatigue strength and ductility. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-88. Producer or source: Charter Dura-Bar, Inc.

AUBERT & DUVAL CNS (35NiCr6)

Aubert and Duval CNS (35NiCr6) is a medium-carbon, nickel-chromium, direct hardening alloy steel. It is a medium hardenability steel in the 0.30 to 0.37 mean carbon content classification. This steel is frequently used for water-quenched parts of moderate section size and for oil-quenched parts of small section size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting. Filing Code: SA-878. Producer or source: Aubert & Duval S.A. (a member of the Eramet Group).

ASSAB 2083

Assab 2083 is a 13.5% chromium corrosion resistant mold steel that is characterized by high wear resistance and good polishability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: TS-822. Producer or source: Assab Group.