COPPER ALLOY No. 836

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. 836 is a free-cutting copper-tin-lead-zinc alloy for castings. It offers good casting characteristics, moderate strength and ductility, good machinability and good resistance to corrosion. It is used widely for such applications as valves, gears and general hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-317. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 844

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. 844 is a free-cutting copper-tin-lead-zinc alloy for castings; it was formerly identified as 81-3-7-9 alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. It is used widely for fittings, plumbing goods and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-349. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Lead Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No.1 C84200 is a free-machining copper-tin-lead-zinc alloy for castings; it was formerly identified as 80-5-2.5-12.5 alloy. It has good casting characteristics, good machinability, moderate strength and ductility and good corrosion resistance. Among its many uses are ornamental fixtures, general hardware, plumbing goods, small gears and pipe fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-450. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-446, October 1982.

COPPER ALLOY No. 845

Alloy Digest ◽  
1979 ◽  
Vol 28 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Low Pressure ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. 845 was formerly identified as 78-3-7-12 alloy or 78 Semi-Red Brass. It is a free-cutting copper-tin-lead-zinc alloy and is characterized by good casting properties, moderate strength and ductility, excellent machinability and good corrosion resistance. Among its many uses are low-pressure valve fittings, plumbing fixtures and general hardware fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-378. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C92600

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Lead Zinc

Abstract Copper Alloy No. C96600 is a cast copper-tin-lead-zinc alloy also known as 87-10-1-2 alloy. It is characterized by a good combination of strength, machinability and resistance to corrosion. This alloy is often used to make castings for valves and pumps which are subject to liquid and gas pressure and, therefore, must be free from internal porosity, shrinkage or other defects. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-410. Producer or source: Copper alloy foundries.

UNS C83600

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract UNS C83600 is a free-cutting copper-tin-lead-zinc casting alloy. It offers good casting characteristics but soundness is poor in large castings. It has moderate strength and ductility, and good resistance to corrosion. It is used widely for such applications as valves, gears and general hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-543. Producer or source: Copper alloy producers.

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Copper Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No. C84200 is a free-cutting copper-zinc-tin-lead alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. Formerly used named (not recommended) are 101, Leaded Semi-Red Brass and 80-5-2.5-12.5. Typical applications are pipe fittings, bushings, locknuts and unions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-446. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-450, December 1982.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C86700

Alloy Digest ◽  
1985 ◽  
Vol 34 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Strength And Ductility

Abstract Copper Alloy No. C86700 is a free-machining, high-tensile (typically 85,000 psi) cast manganese bronze; it is also known as high-strength yellow brass. It has an excellent combination of strength and ductility and good resistance to corrosion in numerous environments, including seawater. Typical uses are valve stems, moderate-duty gears and marine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-499. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C94500

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C94500 is a cast bronze containing nominally 73% copper, 20% lead and 7% tin. It has excellent machinability, good casting characteristics, low strength and good resistance to corrosion. It is used for bearings, locomotive wearing parts and for corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-528. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document