COPPER ALLOY No. C94400

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C94400 is a cast bronze containing nominally 8% tin, 11% lead and 0.35% phosphorus. It has excellent machinability, good casting characteristics, low strength and good resistance to corrosion. It is used for such applications as bearings, bushings and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-448. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C94500

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C94500 is a cast bronze containing nominally 73% copper, 20% lead and 7% tin. It has excellent machinability, good casting characteristics, low strength and good resistance to corrosion. It is used for bearings, locomotive wearing parts and for corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-528. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 932

Alloy Digest ◽  
1980 ◽  
Vol 29 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. 932 is a cast bronze containing nominally 7% lead and 7% tin. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Bearing Bronze 660 and 83-7-7-3. It has relatively low strength, good machinability and good resistance to corrosion. Its uses include bushings, bearings and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-387. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93900

Alloy Digest ◽  
1984 ◽  
Vol 33 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Tin Bronze ◽  
Low Strength ◽  
General Service

Abstract Copper Alloy No. C93900 is a cast bronze of fairly low strength. It has good machinability and good resistance to corrosion. Its commercial names formerly used (not recommended) are: (1) High-Leaded Tin Bronze and (2) 79-6-15. Among its uses are bearings for general service and pump bodies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-487. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-475, April 1984.

COPPER ALLOY No. C93900

Alloy Digest ◽  
1984 ◽  
Vol 33 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Tin Bronze ◽  
Low Strength

Abstract Copper Alloy No. C93900 is a cast copper-tin-lead alloy (bronze). It has good machinability, low strength and good resistance to corrosion. This alloy formerly was known by several commercial names (not recommended); they are: (1) High-Leaded Tin Bronze and (2) 79-6-15. It is produced only in the form of continuous castings and its uses include bearings, pump bodies and impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-475. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-487, November 1984.

COPPER ALLOY No. C61800

Alloy Digest ◽  
1985 ◽  
Vol 34 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Cold Worked

Abstract Copper Alloy No. C61800 is an aluminum bronze containing nominally 89% copper, 10% aluminum and 1% iron. It has moderate strength, moderate ductility and can be hot worked or cold worked successfully. It has good resistance to corrosion in many environments. Its numerous uses include bushings, bearings, corrosion-resistant components and welding rod. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-492. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Copper Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No. C84200 is a free-cutting copper-zinc-tin-lead alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. Formerly used named (not recommended) are 101, Leaded Semi-Red Brass and 80-5-2.5-12.5. Typical applications are pipe fittings, bushings, locknuts and unions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-446. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-450, December 1982.

COPPER ALLOY No. 165

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
Electrical Conductor ◽  
Annealed Condition ◽  
Low Strength

Abstract Copper Alloy No. 165 is a copper-cadmium-tin alloy with low strength and high ductility in the annealed condition. In the hard-drawn condition, characterized by high strength and low ductility, it is used widely as an electrical conductor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-327. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 844

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. 844 is a free-cutting copper-tin-lead-zinc alloy for castings; it was formerly identified as 81-3-7-9 alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. It is used widely for fittings, plumbing goods and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-349. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document