MOTUNG

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose

Abstract MOTUNG is a general-purpose high-molybdenum, low-tungsten type of high-speed tool steel. It was the first molybdenum high-speed steel to be melted commercially. It is one of the least expensive high-steels and has an excellent combination of cutting ability, toughness and finishing properties. Its many uses include drills, cutters, punches, lathe tools and general-purpose applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-362. Producer or source: Cyclops Corporation.

UNS T12001

Alloy Digest ◽  
1989 ◽  
Vol 38 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS T12001 is a general-purpose, tungsten, high-speed steel containing nominally 18% tungsten, 4% chromium and 1% vanadium. It is suitable for practically all high-speed applications. This steel has been the standard of the industry for many years because of its cutting ability, ease of heat treatment and minimum tendency to decarburize. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-495. Producer or source: Tool steel mills.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

UNS T11301

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Heavy Duty ◽  
Steel Mills ◽  
Red Hardness

Abstract UNS No. T11301 is a general-purpose high-molybdenum, low-tungsten type of high-speed tool steel. It has an excellent combination of cutting ability, toughness and finishing properties. Its cutting ability is good except for heavy-duty, continuous cutting operations where the ultimate in red-hardness is required. Its toughness is as great as that of any other high-speed steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-492. Producer or source: Tool steel mills.

AISI TYPE T1

Alloy Digest ◽  
1980 ◽  
Vol 29 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type T1 is a general-purpose, tungsten, high-speed steel containing nominally 18% tungsten, 4% chromium and 1% vanadium. It is suitable for practically all high-speed applications. This steel has been the standard of the industry for many years because of its cutting ability, ease of heat treatment and minimum tendency to decarburize. Its many applications include drills, taps, lathe and planer tools, broaches and hobs. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-373. Producer or source: Tool steel mills.

ELECTRITE TATMO

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Low Cost ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Tool Steels ◽  
Steel Company

Abstract ELECTRITE TATMO is a molybdenum type high-speed steel and is recommended as a general purpose tool steel. It has good toughness and excellent grindability along with a relatively low cost. These factors make it an economic and efficient member of the high-speed family of tool steels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-268. Producer or source: Latrobe Steel Company.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

GUTERL M-2

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance ◽  
Special Steel ◽  
Steel Corporation ◽  
Circular Saws

Abstract GUTERL M-2 is a molybdenum-tungsten type of high-speed steel with fairly good resistance to decarburization. It is a general-purpose high-speed steel and it provides excellent resistance to abrasion and shock. It is used widely for cutting tools. Among its many applications are hack saws, circular saws, lathe tools, gear cutters, planer tools and wood knives. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-387. Producer or source: Guterl Special Steel Corporation.

VASCO 8-N-2

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose

Abstract VASCO 8-N-2 is a molybdenum high-speed steel containing a low percentage of tungsten. It can be used successfully for a variety of cutting tools; in fact, it is a general-purpose high-speed steel. Its composition represents the first molybdenum high-speed steel to be manufactured and find practical use in the field of cutting tools. Its many uses include drills, milling cutters, lathe tools, blanking dies and special shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-351. Producer or source: Teledyne Vasco.

JESSOP MUSTANG

Alloy Digest ◽  
1984 ◽  
Vol 33 (10) ◽  
Keyword(s):  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Company ◽  
End Mills

Abstract JESSOP MUSTANG is a tungsten-molybdenum high-speed steel that contains vanadium. It offers excellent cutting ability and, for most applications, its performance excels the tungsten-base (18 tungsten-4 chromium-1 vanadium) high-speed grades. It is often used as a general-purpose high-speed steel. Among its many applications are boring tools, broaches, cutters, drills, end mills, gear cutters, lathe tools, taps, punches and wood-working knives. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-430. Producer or source: Jessop Steel Company.

TATMO

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Twist Drills

Abstract Tatmo is a general-purpose high-speed steel often used in twist drills and taps. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-633. Producer or source: Timken Latrobe Steel.

Sign in / Sign up

Export Citation Format

Share Document