Effect of Metal Oxides and Smelting Dust on SO2 Conversion to SO3

The purpose of this study was to investigate the effects of metal oxides and smelting dust on the formation of sulfur trioxide during copper, lead, zinc smelting process and flue. Focusing on the effects of SO2 concentration, O2 concentration, and temperature on SO2 oxidation conversion rate under homogeneous test conditions, and under various metal oxide oxidation conditions, further in dust (mainly electric dust removal ash in copper, lead, zinc smelting process), which were studied by single factor experiment test. The results showed that the effect of heterogeneous catalytic oxidation on SO2 conversion rate is much greater than that of pure gas phase oxidation. The addition of five pure metal oxides such as Fe2O3, CuO, Al2O3, ZnO, and CaO obviously promoted the SO2 conversion rate under different conditions. At different temperatures, the ability of metal oxides to promote SO2 conversion is ranked: Fe2O3 > CuO > CaO > ZnO > Al2O3. The catalytic oxidation of copper, lead, and zinc smelting dust to SO2 conversion rate was studied, and the conclusion was drawn that the metal oxides that promoted SO2 conversion rate in copper smelting dust were Fe2O3, Al2O3, ZnO, CaO, and the main substance was Fe2O3; the metal oxides that promoted SO2 conversion in zinc smelting dust were Fe2O3, Al2O3, ZnO, CaO, CuO, and the main substances were Fe2O3 and ZnO; the metal oxides that promoted SO2 conversion rate in lead smelting dust were Fe2O3. Whether metal oxides or copper, zinc, lead smelting dust in the experiment, Fe2O3 displayed the strongest catalytic oxidation capacity.