The aim of the work is to carry out an economic assessment of the effect of various structures of multi-tiered oxygen lances and methods for flushing the converter bath with the afterburning of waste gases on the efficiency of the production of iron-carbon semi-products in a modern metallurgical plant. The study was conducted for the process of steel smelting in converters of combined blowing with supply of oxygen from above and neutral gas through the bottom in the conditions of using conventional and multi-tiered oxygen tuyeres. Studies on the afterburning of converter gas in the converter cavity showed that, in proportion to the increase in the proportion of CO2 in the exhaust gases, the costs of steel production are reduced. Compared with the use of tuyeres of classical construction, they amount to 3.23 US dollars / ton of steel for double-circuit, 6.81 US dollars / ton of steel for bunk, and 11.61 US dollars / ton of steel for three-tier. It was determined that when using the classic design of the upper oxygen tuyere, the lower heat of combustion of the converter gas is 10 MJ / m3. In comparison with the classical design, the two-tier, double-circuit and three-tier tuyeres ensure a reduction in the lower heat of combustion of the converter gas by 8,5; 4.4 and 27.1% (rel.), Respectively. On the basis of the data obtained, it is possible to draw a conclusion about the effectiveness of using the technology of combined blowing of the converter bath with the afterburning of exhaust gases in the converter cavity.
Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
