Summary
Steam injection is widely used for bitumen recovery. However, steam is not efficient for shallow or thin reservoirs because of heat loss in the wellbore or to surrounding formations. Numerous alternatives have been proposed, including the addition of solvents and replacement of steam with volatile solvents. Here, we describe a new technology that combines nonvolatile ionic liquids (ILs) and waterflooding for bitumen recovery that can deliver high recovery at ambient temperature.
Different ILs were designed for complete dispersal/dissolution of bitumen at ambient temperature. The designed ILs were tested in coreflood experiments with high–grade oil–sand ore from Alberta. Two different scenarios were tested: continuous injection of ILs at different injection rates and injection of a slug of ILs followed by water injection. Different slug volumes were tested at a constant injection rate. After ILs injection, the oil sand was removed from the column, and the remaining bitumen was quantified using a modified Dean–Stark method. Viscosity and solid–content measurements of the recovered samples at breakthrough were conducted.
Bitumen recovery by the designed ILs can be thought of as a solution mining process. Tuning the physical and chemical properties of the ILs is the most important aspect of achieving the desired interaction with the oil–sand system. Properties of the designed IL depend on the selected cation and anion, and the strength of their intermolecular interaction. Primary amines mixed with the oleic acid chosen for IL1 form a viscous IL that can recover bitumen, leaving a slight amount of bitumen behind, but a large pressure gradient. Changing the cation to tertiary amines produces significantly less–viscous ILs, which completely recover the bitumen in the oil–sand column. Moreover, the cation can be tailored to significantly minimize the fines (clay) migration and viscosity of the recovered bitumen and to provide compatibility with an aqueous phase. In all cases, these recoveries are significant, compared with the currently used technologies.
This work proves that bitumen recovery from oil sand is possible at low temperatures by means of a process analogous to solution mining with the design of the proper ILs, in contrast to viscosity–reduction processes achieved by thermal methods. The properties of these ILs can be tuned for different recovery mechanisms. Thus, this work establishes the basis for developing a new class of in–situ recovery processes with high recovery efficiencies and low environmental impact.
Some Synthetic Applications of Nickel Boride at Ambient Temperature
