Kinematics of the Connecting Rod of a Two-Mobility Five-Link Space Mechanism with a Double Crank

Author(s):  
Munir G. Yarullin ◽  
Ilnur R. Isyanov ◽  
Alexander P. Mudrov
Keyword(s):  
2011 ◽  
Vol 3 (1) ◽  
pp. 152-160
Author(s):  
A. Souf A. Souf ◽  
◽  
K. Talea K. Talea ◽  
A. Bakali A. Bakali ◽  
M. Talea M. Talea ◽  
...  

2018 ◽  
Vol 50 (04) ◽  
pp. 561-570
Author(s):  
I. A. QAZI ◽  
A. F. ABBASI ◽  
M. S. JAMALI ◽  
INTIZAR INTIZAR ◽  
A. TUNIO ◽  
...  

2020 ◽  
pp. 1-17
Author(s):  
Qing Sun ◽  
Shuai Guo ◽  
Leigang Zhang

BACKGROUND: The definition of rehabilitation training trajectory is of great significance during rehabilitation training, and the dexterity of human-robot interaction motion provides a basis for selecting the trajectory of interaction motion. OBJECTIVE: Aimed at the kinematic dexterity of human-robot interaction, a velocity manipulability ellipsoid intersection volume (VMEIV) index is proposed for analysis, and the dexterity distribution cloud map is obtained with the human-robot cooperation space. METHOD: Firstly, the motion constraint equation of human-robot interaction is established, and the Jacobian matrix is obtained based on the speed of connecting rod. Then, the Monte Carlo method and the cell body segmentation method are used to obtain the collaborative space of human-robot interaction, and the VMEIV of human-robot interaction is solved in the cooperation space. Finally, taking the upper limb rehabilitation robot as the research object, the dexterity analysis of human-robot interaction is carried out by using the index of the approximate volume of the VMEIV. RESULTS: The results of the simulation and experiment have a certain consistency, which indicates that the VMEIV index is effective as an index of human-robot interaction kinematic dexterity. CONCLUSIONS: The VMEIV index can measure the kinematic dexterity of human-robot interaction, and provide a reference for the training trajectory selection of rehabilitation robot.


2011 ◽  
Vol 704-705 ◽  
pp. 302-307
Author(s):  
Lei Xu ◽  
Guang Ze Dai ◽  
Xing Ming Huang ◽  
Jing Han ◽  
Jun Wen Zhao

Numerical simulation of connecting rod die forging processing was performed by finite element method (FEM) software Deform 3D. The changes of the temperature fields, stress fields of the billet and dies, and upper setting force-stroke curve during the die forging were obtained. The simulation results show that (1) the increase of the fillet radius of dies could effectively reduce the stress concentration so that to prevent the die crack arising at high level stress; (2) the optimum parameters of die forging process are 430°C for forging temperature, 200°C for preheat temperature of dies and 80mm/s for reduction rate by comparing both fields of the stress and temperature during different forging process..


2019 ◽  
Vol 105 ◽  
pp. 313-320 ◽  
Author(s):  
H. Ding ◽  
J.F. Xie ◽  
Z.Q. Bai ◽  
Y. Li ◽  
Y. Long ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document