scholarly journals Turbulent heat transfer for pipe flow with uniform heat generation

1979 ◽  
Vol 12 (1) ◽  
pp. 55-58 ◽  
Author(s):  
T. Y. Na ◽  
J. P. Chiou
Keyword(s):  
Heat Transfer ◽  
Heat Generation ◽  
Pipe Flow ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Uniform Heat

Large Eddy Simulation of Turbulent Heat Transfer in Curved-Pipe Flow

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Changwoo Kang ◽  
Kyung-Soo Yang
Keyword(s):  
Heat Transfer ◽  
Pipe Flow ◽  
Temperature Fluctuations ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Subgrid Scale ◽  
Curved Pipe ◽  
Eddy Simulation ◽  
Large Eddy ◽  
The Mean

In the present investigation, turbulent heat transfer in fully developed curved-pipe flow has been studied by using large eddy simulation (LES). We consider a fully developed turbulent curved-pipe flow with axially uniform wall heat flux. The friction Reynolds number under consideration is Reτ  = 1000 based on the mean friction velocity and the pipe radius, and the Prandtl number (Pr) is 0.71. To investigate the effects of wall curvature on turbulent flow and heat transfer, we varied the nondimensionalized curvature (δ) from 0.01 to 0.1. Dynamic subgrid-scale models for turbulent subgrid-scale stresses and heat fluxes were employed to close the governing equations. To elucidate the secondary flow structures due to the pipe curvature and their effect on the heat transfer, the mean quantities and various turbulence statistics of the flow and temperature fields are presented, and compared with those of the straight-pipe flow. The friction factor and the mean Nusselt number computed in the present study are in good agreement with the experimental results currently available in the literature. We also present turbulence intensities, skewness and flatness factors of temperature fluctuations, and cross-correlations of velocity and temperature fluctuations. In addition, we report the results of an octant analysis to clarify the correlation between near-wall turbulence structures and temperature fluctuation in the vicinity of the pipe wall. Based on our results, we attempt to clarify the effects of the pipe curvature on turbulent heat transfer. Our LES provides researchers and engineers with useful data to understand the heat-transfer mechanisms in turbulent curved-pipe flow, which has numerous applications in engineering.

Characterization of Turbulent Heat Transfer in Ribbed Pipe Flow

2016 ◽  
Vol 138 (4) ◽  
Author(s):  
Changwoo Kang ◽  
Kyung-Soo Yang
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Pipe Flow ◽  
Temperature Fields ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Mean Flow ◽  
Transfer Enhancement ◽  
Pitch Ratio ◽  
The Mean

In the current investigation, we performed large eddy simulation (LES) of turbulent heat transfer in circular ribbed-pipe flow in order to study the effects of periodically mounted square ribs on heat transfer characteristics. The ribs were implemented on a cylindrical coordinate system by using an immersed boundary method, and dynamic subgrid-scale models were used to model Reynolds stresses and turbulent heat flux terms. A constant and uniform wall heat flux was imposed on all the solid boundaries. The Reynolds number (Re) based on the bulk velocity and pipe diameter is 24,000, and Prandtl number is fixed at Pr = 0.71. The blockage ratio (BR) based on the pipe diameter and rib height is fixed with 0.0625, while the pitch ratio based on the rib interval and rib height is varied with 2, 4, 6, 8, 10, and 18. Since the pitch ratio is the key parameter that can change flow topology, we focus on its effects on the characteristics of turbulent heat transfer. Mean flow and temperature fields are presented in the form of streamlines and contours. How the surface roughness, manifested by the wall-mounted ribs, affects the mean streamwise-velocity profile was investigated by comparing the roughness function. Local heat transfer distributions between two neighboring ribs were obtained for the pitch ratios under consideration. The flow structures related to heat transfer enhancement were identified. Friction factors and mean heat transfer enhancement factors were calculated from the mean flow and temperature fields, respectively. Furthermore, the friction and heat-transfer correlations currently available in the literature for turbulent pipe flow with surface roughness were revisited and evaluated with the LES data. A simple Nusselt number correlation is also proposed for turbulent heat transfer in ribbed pipe flow.

scholarly journals Turbulent heat transfer in a pipe flow with a pair of twisted tapes.

1991 ◽  
Vol 57 (535) ◽  
pp. 1033-1037
Author(s):  
Kunio HIJIKATA ◽  
Kazutaka MINAMI ◽  
Takao NAGASAKI ◽  
Yoshiyuki AOYAMA
Keyword(s):  
Heat Transfer ◽  
Pipe Flow ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Twisted Tapes

Heat Transfer Enhancement in Turbulent Ribbed-Pipe Flow

2017 ◽  
Vol 139 (7) ◽  
Author(s):  
Changwoo Kang ◽  
Kyung-Soo Yang
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Pipe Flow ◽  
Joint Probability ◽  
Turbulent Heat Transfer ◽  
Immersed Boundary ◽  
Turbulent Heat ◽  
Transfer Enhancement ◽  
Maximum Heat ◽  
Maximum Heat Transfer

The present study aims at explaining why heat transfer is enhanced in turbulent ribbed-pipe flow, based on our previous large eddy simulation (LES) database (Kang and Yang, 2016, “Characterization of Turbulent Heat Transfer in Ribbed Pipe Flow,” ASME J. Heat Transfer, 138(4), p. 041901) obtained for Re = 24,000, Pr = 0.71, pitch ratio (PR) = 2, 4, 6, 8, 10, and 18, and blockage ratio (BR) = 0.0625. Here, the bulk velocity and the pipe diameter were used as the velocity and length scales, respectively. The ribs were implemented in the cylindrical coordinate system by means of an immersed boundary method. In particular, we focus on the cases of PR ≥ 4 for which heat transfer turns out to be significantly enhanced. Instantaneous flow fields reveal that the vortices shed from the ribs are entrained into the main recirculating region behind the ribs, inducing velocity fluctuations in the vicinity of the pipe wall. In order to identify the turbulence structures responsible for heat transfer enhancement in turbulent ribbed-pipe flow, various correlations among the fluctuations of temperature and velocity components have been computed and analyzed. The cross-correlation coefficient and joint probability density distributions of velocity and temperature fluctuations, obtained for PR = 10, confirm that temperature fluctuation is highly correlated with velocity-component fluctuation, but which component depends upon the axial location of interest between two neighboring ribs. Furthermore, it was found via the octant analysis performed for the same PR that at the axial point of the maximum heat transfer rate, O3 (cold wallward interaction) and O5 (hot outward interaction) events most contribute to turbulent heat flux and most frequently occur.

scholarly journals Validation Criteria for DNS of Turbulent Heat Transfer in Pipe Flow

2014 ◽  
Vol 90 ◽  
pp. 599-604
Author(s):  
Sumon Saha ◽  
Andrew S.H. Ooi ◽  
Hugh M. Blackburn
Keyword(s):  
Heat Transfer ◽  
Pipe Flow ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Validation Criteria
Sign in / Sign up

Export Citation Format

Share Document