Application of an Electromechanical Drive for Controlling the Guide Apparatus and Impeller Blades of Hydraulic Turbines of Hydroelectric Power Plants/Pumped-Storage Electric Power Plants (HPPs/PSPs)

Author(s):  
S. G. Pryganov ◽  
V. N. Panov
2021 ◽  
Vol 264 ◽  
pp. 04056
Author(s):  
Muradilla Mukhammadiev ◽  
Kurbon Dzhuraev ◽  
Sanjar Juraev ◽  
Abdurauf Abduaziz Uulu ◽  
A Makhmudov

In our country, a lot of attention is paid to the development of the energy sector. A lot of work is underway to modernize existing capacities and commission new capacities. At the same time, the unit capacities of units and power plants also increase, which ensures faster commissioning of capacities in the power system and an increase in the efficiency of power plants. Attention is also paid to the development of power plants based on renewable energy sources (hydraulic, solar, wind, etc.). One of the most important tasks in the power industry is to cover peak minimum and maximum loads, which is becoming increasingly important in connection with the growth of the power system's capacity. As is known, according to world indicators, the maneuverable capacities should be about 25% of the total power of the EPS. The most promising maneuverable capacities are hydroelectric power plants. However, in our country, hydroelectric power plants account for about 14.3%. This task will become more complicated with the introduction of capacities based on solar and wind energy and the commissioning of new hydroelectric and thermal power plants in the Republic. This is because RES capacities have a significant discontinuity even during the day, and the water resources in the Republic are primarily for irrigation and drainage purposes and are significantly variable during the season. One way to solve these problems in the world is the creation and use of pumped storage power plants (PSPP). The peculiarities of the creation and use of pumped storage power plants in our region are that the available hydro resources of our region are mainly of water management importance, while the task is also to increase the energy efficiency of existing reservoirs. Based on the foregoing, we can say that the development of methods for determining the economic efficiency of pumped storage power plants, taking into account direct and indirect effects, taking into account the peculiarities of their use in energy and water management systems of Uzbekistan is the main task for the present time. To solve the set tasks, a new methodology and program for substantiating the technical and economic indicators of pumped storage power plants in Uzbekistan's energy and water management systems have been developed. The schemes of using pumped storage power plants at four energy and water management facilities, that is, the Tuyamuyun hydro subunit, Arnasai, Talimarjan, and Khodjikent reservoirs, were considered, and for these facilities, based on the developed methodology and program, their technical and economic parameters of the pumped storage power plant were determined. Based on the results obtained, it can be said that using the PSPP in four facilities, it is possible to generate a total of about 418 MW of capacity and more than 930.0 million kWh of electricity, as well as to save 139 thousand tons of fuel equivalent per year, with this, the annual economic efficiency will be about 700.0 billion sums.


2018 ◽  
Vol 54 (6) ◽  
pp. 468-471 ◽  
Author(s):  
M. M. Mukhammadiev ◽  
Sh. I. Klichev

2020 ◽  
Vol 216 ◽  
pp. 01046
Author(s):  
Yurii Chukreev

The issues of presentation generating equipment when solving the problem of substantiating the operational reserve of power in the UES of Russia are considered. The influence of the adopted composition of equipment, various modeling of capital and medium repairs, accounting for the energy supply of hydroelectric power plants on the values of indicators balance reliability and means their support is given.


1959 ◽  
Vol 81 (4) ◽  
pp. 455-470 ◽  
Author(s):  
Norman R. Gibson

The purpose of this paper is to examine the records of experience, for 35 years from 1920 to 1955, in the use of the Gibson Method and Apparatus, for measuring the flow of water as applied in field efficiency tests of turbines in hydro-electric power plants. Diagrams based on tables of maximum efficiencies of comparable units, from a total of 310 tests are presented. A few unusual experiences are cited and described. A comprehensive discussion of the accuracy of the method is given; with particular reference to the critical analyses of Francis Salgat and the late Dieter Thoma and others and to the precision which can be expected in determining the various factors required for measuring water quantities by this method. Four appendixes give: (1) A brief description of the Gibson Method and Apparatus; (2) some slight revisions of the author’s original paper published by ASME in 1923; (3) a numerical example of the delineation and computation of a differential pressure-time diagram; and (4) a partial Bibliography with notes.


Sign in / Sign up

Export Citation Format

Share Document