Lower limit of determination values for trace elements in iron certified reference materials by neutron activation analysis with multiple gamma-ray detection

2008 ◽  
Vol 278 (2) ◽  
pp. 521-525 ◽  
Author(s):  
A. Kimura ◽  
Y. Toh ◽  
M. Oshima ◽  
Y. Hatsukawa
Keyword(s):  
Trace Elements ◽  
Neutron Activation Analysis ◽  
Activation Analysis ◽  
Neutron Activation ◽  
Lower Limit ◽  
Reference Materials ◽  
Gamma Ray ◽  
Certified Reference Materials ◽  
Limit Of Determination

Application of instumetal neutron activation analysis method for determination of some trace elements in lichens around three sites in Algiers

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Tarek Azli ◽  
Zohra Bouhila ◽  
Ammar Mansouri ◽  
Mohammed Messaoudi ◽  
Zineb Zergoug ◽  
...  
Keyword(s):  
Trace Elements ◽  
Neutron Activation Analysis ◽  
Activation Analysis ◽  
Neutron Activation ◽  
Reference Materials ◽  
Gamma Ray ◽  
Certified Reference Materials ◽  
Standard Reference Materials ◽  
Gamma Ray Spectrometry ◽  
Analysis Technique

Abstract Trace elements (TEs) constitute a major part of pollution, which can induce a detrimental impact on public health. A precise analysis of these elements in the environment is an important parameter in the evaluation of the population's quality of life. This work aims to quantify the concentration of some trace elments in enviromental samples using Istrumental Neutron Activation Analysis technique (INAA); also a comparative study between three sampling points (Draria, Baraki and Reghaia) were done. The Samples and standards were irradiated for 6 h at “NUR” research reactor with a thermal neutron flux of 1013 n cm−2 s−1, and analyzed by gamma ray spectrometry using HPGe detector. Seventeen elements were assessed: Ba, Br, Ce, Co, Cr, Hf, Fe, La, Nd, Rb, Sb, Sc, Se, Sm, Sr, Yb and Zn in this study. The accuracy of the method was evaluated by analyzing Certified Reference Materials (CRMs) and Standard Reference Materials (SRMs). The data obtained in this work may contribute to obtaining information about a possible rank of pollution and the different capabilities of elemental bioaccumulation by lichens.

scholarly journals Determination of uranium in tree bark samples by epithermal neutron activation analysis

2019 ◽  
Vol 7 (2A) ◽  
Author(s):  
Nicole Pereira de Lima ◽  
Mitiko Saiki
Keyword(s):  
Neutron Activation Analysis ◽  
Activation Analysis ◽  
Neutron Activation ◽  
Reference Materials ◽  
Epithermal Neutron ◽  
Certified Reference Materials ◽  
Tree Bark ◽  
Good Precision ◽  
Epithermal Neutron Activation Analysis ◽  
Relative Standard

In this study uranium (U) concentrations were determined in certified reference materials (CRMs) and in tree bark samples collected in “Cidade Universitária Armando de Salles Oliveira” (CUASO) USP, São Paulo. The barks were collected from different species namely Poincianella pluviosa and Tipuana tipu. These bark samples were cleaned, dried, grated and milled for the analyses by epithermal neutron activation analysis method (ENAA). This method consists on irradiating samples and U standard in IEA-R1 nuclear reactor with thermal neutron flux of 1.9 x 1012 n cm-2 s-1 during 40 to 60 seconds depending on the samples’ matrices. The samples and standard were measured by gamma ray spectroscopy. U  was identified by the peak of  74.66 keV of 239U with half life of 23.47 minutes. Concentration of U was calculated by comparative method. For analytical quality control of U results, certified reference materials were analyzed. Results obtained for CRMs presented good precision and accuracy, with |Z score| ≤ 0.39. Uranium concentrations in tree barks varied from 83.1 to 627.6 ng g-1 and the relative standard deviations of these results ranged from 1.8 to 10 %.

Sign in / Sign up

Export Citation Format

Share Document