scholarly journals Effect of conditioning and 1 year aging on the bond strength and interfacial morphology of glass-ionomer cement bonded to dentin

2021 ◽  
Vol 37 (1) ◽  
pp. 106-112
Author(s):  
Shuhei Hoshika ◽  
Shihchun Ting ◽  
Zubaer Ahmed ◽  
Fei Chen ◽  
Yu Toida ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Interfacial Morphology ◽  
Ionomer Cement

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

scholarly journals Bond strength of orthodontic light-cured resin-modified glass ionomer cement

2010 ◽  
Vol 33 (2) ◽  
pp. 180-184 ◽  
Author(s):  
H. Y. Cheng ◽  
C. H. Chen ◽  
C. L. Li ◽  
H. H. Tsai ◽  
T. H. Chou ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Influence of thermocycling on shear bond strength of glass ionomer cement to Er:YAG laser-prepared enamel

2015 ◽  
Vol 48 (10) ◽  
pp. 978-984 ◽  
Author(s):  
Yuan-Yuan Kong ◽  
Yi Chen ◽  
Rui Shen ◽  
Qian-Zhou Jiang ◽  
Min-Le Chen
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Er:Yag Laser ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement

scholarly journals The Effect of Altered pH on Push-Out Bond Strength of Biodentin, Glass Ionomer Cement, Mineral Trioxide Aggregate and Theracal

2015 ◽  
Vol 62 (1) ◽  
pp. 7-13 ◽  
Author(s):  
Sameer Makkar ◽  
Ruchi Vashisht ◽  
Anita Kalsi ◽  
Pranav Gupta
Keyword(s):  
Bond Strength ◽  
Alkaline Medium ◽  
Gold Foil ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Mineral Trioxide Aggregate ◽  
Glass Ionomer ◽  
Human Teeth ◽  
Push Out ◽  
Ionomer Cement

Summary Introduction Throughout the history of dentistry, a wide variety of materials such as gold-foil, silver posts, amalgam, zinc oxide eugenol, glass ionomer cements, mineral trioxide aggregate have been used as retrograde fillings. Altered pH in periapical lesions can affect push-out bond strength of these materials. The aim of this study was to evaluate the effect of altered pH on push-out bond strength of Biodentin, Glass ionomer cement (GIC), Mineral trioxide aggregate (MTA) and Theracal. Material and Methods Forty-eight dentin slices of extracted single-rooted human teeth were sectioned and their canal portion instrumented to achieve a diameter of 1.4 mm. The specimens were then assigned into the four groups (one group for each material) with 12 samples in each group. All groups were further divided into 3 subgroups (with 4 specimens in each subgroup): acidic (butyric acid buffered at pH 6.4), neutral (phosphate buffer saline solution at pH 7.4) and alkaline (buffered potassium hydroxide at pH 8.4). Samples were incubated for 4 days at 37°C in acidic, neutral or alkaline medium. Push-out bond strength was measured using a Universal Testing Machine. The slices were examined under a stereomicroscope to determine the nature of bond failure. Results GIC showed the highest bond strength (33.33MPa) in neutral and acidic medium (26.75MPa) compared to other materials. Biodentin showed the best result in alkaline medium. Conclusion Altered pH level affected push-out bond strength of root end materials. GIC demonstrated good push-out bond strength that increased with decrease of pH whereas newer materials Biodentin and Theracal showed satisfying results in altered pH.

Effects of Cyclic Stressing on Attachment Bond Strength using Glass Ionomer Cement and Composite Resin

1995 ◽  
Vol 22 (1) ◽  
pp. 23-27 ◽  
Author(s):  
H. C. Moseley ◽  
E. N. Horrocks ◽  
G. J. Pearson ◽  
E. H. Davies
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement

scholarly journals In Vitro Shear Bond Strength of Three Self-adhesive Resin Cements and a Resin-Modified Glass Ionomer Cement to Various Prosthodontic Substrates

2013 ◽  
Vol 38 (2) ◽  
pp. 186-196 ◽  
Author(s):  
Camila Sabatini ◽  
Manthan Patel ◽  
Eric D'Silva
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Setting Reaction ◽  
Resin Modified Glass Ionomer ◽  
Bond Strengths ◽  
Ionomer Cement

SUMMARY Objective To evaluate the shear bond strength (SBS) of three self-adhesive resin cements and a resin-modified glass ionomer cement (RMGIC) to different prosthodontic substrates. Materials and Methods The substrates base metal, noble metal, zirconia, ceramic, and resin composite were used for bonding with different cements (n=12). Specimens were placed in a bonding jig, which was filled with one of four cements (RelyX Unicem, Multilink Automix, Maxcem Elite, and FujiCEM Automix). Both light-polymerizing (LP) and self-polymerizing (SP) setting reactions were tested. Shear bond strength was measured at 15 minutes and 24 hours in a testing device at a test speed of 1 mm/min and expressed in MPa. A Student t-test and a one-way analysis of variance (ANOVA) were used to evaluate differences between setting reactions, between testing times, and among cements irrespective of other factors. Generalized linear regression model and Tukey tests were used for multifactorial analysis. Results Significantly higher mean SBS were demonstrated for LP mode relative to SP mode (p<0.001) and for 24 hours relative to 15 minutes (p<0.001). Multifactorial analysis revealed that all factors (cement, substrate, and setting reaction) and all their interactions had a significant effect on the bond strength (p<0.001). Resin showed significantly higher SBS than other substrates when bonded to RelyX Unicem and Multilink Automix in LP mode (p<0.05). Overall, FujiCEM demonstrated significantly lower SBS than the three self-adhesive resin cements (p<0.05). Conclusions Overall, higher bond strengths were demonstrated for LP relative to SP mode, 24 hours relative to 15 minutes and self-adhesive resin cements compared to the RMGICs. Bond strengths also varied depending on the substrate, indicating that selection of luting cement should be partially dictated by the substrate and the setting reaction.

Sign in / Sign up

Export Citation Format

Share Document