scholarly journals Effect of Mixing Ingredient on Compressive Strength of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash

2015 ◽  
Vol 125 ◽  
pp. 804-810 ◽  
Author(s):  
Khairunisa Muthusamy ◽  
Nurazzimah Zamri ◽  
Mohammad Amirulkhairi Zubir ◽  
Andri Kusbiantoro ◽  
Saffuan Wan Ahmad
Keyword(s):  
Compressive Strength ◽  
Palm Oil ◽  
Oil Palm ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Palm Oil Fuel Ash ◽  
Aggregate Concrete ◽  
Oil Palm Shell ◽  
Fuel Ash ◽  
Oil Fuel

Acid Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash

2015 ◽  
Vol 754-755 ◽  
pp. 326-330 ◽  
Author(s):  
Khairunisa Muthusamy ◽  
Nurazzimah Zamri ◽  
Iqbal Mohd Haniffa ◽  
Noor Nabilah Sarbini ◽  
Fadzil Mat Yahaya
Keyword(s):  
Compressive Strength ◽  
Palm Oil ◽  
Oil Palm ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Palm Oil Fuel Ash ◽  
Palm Shell ◽  
Oil Palm Shell ◽  
Fuel Ash ◽  
Oil Fuel

Concern towards reducing waste disposed by Malaysian palm oil industry, palm oil fuel ash (POFA) and oil palm shell (OPS) that poses negative impact to the environment has initiated research on producing oil palm shell lightweight aggregate concrete (OPS LWAC) containing palm oil fuel ash. The present investigation looks into the effect of palm oil fuel ash content as partial cement replacement to compressive strength and acid resistance of oil palm shell lightweight aggregate concrete. Two types of mix, plain OPS LWAC and another one containing POFA as partial cement replacement have been used in this research. Cubes of 100 x 100 x 100 (mm) were water cured for 28 days before subjected to compressive strength test and acid resistance test. The findings indicate that suitable integration of POFA content would ensure occurrence of optimum pozzolanic reaction leading to densification of concrete internal structure which increases the compressive strength and better durability to acid attack. Integration of 20% POFA successfully assist concrete to achieve the highest compressive strength and exhibit superior resistance against acid attack compared to other mixes.

POFA: A Potential Partial Cement Replacement Material in Oil Palm Shell Lightweight Aggregate Concrete

2014 ◽  
Vol 567 ◽  
pp. 446-450 ◽  
Author(s):  
Khairunisa Muthusamy ◽  
Zamri Nurazzimah
Keyword(s):  
Palm Oil ◽  
Oil Palm ◽  
Lightweight Aggregate ◽  
Oil Industry ◽  
Lightweight Aggregate Concrete ◽  
Palm Oil Fuel Ash ◽  
Aggregate Concrete ◽  
Oil Palm Shell ◽  
Fuel Ash ◽  
Oil Fuel

Today, the necessity of environmental awareness and enforcement is more demanding and crucial than ever before. Environmental protection encompasses not only pollution but also sustainable development and conservation of natural resources and the eco-system. As a conclusion, protection and preservation of environment is still a pressing issue. This issue on environmental preservations and sustainability all over the world has lead to innovations of new material using by-products generated from various sectors such as palm oil industry. One of the potential recycle materials from palm oil industry is palm oil fuel ash which contains siliceous compositions and reacted as pozzolans to produce a stronger and denser concrete. Palm oil fuel ash (POFA) is by-product obtained by burning of fibers, shells and empty fruit bunches as fuel in palm oil mill boilers. Apart from POFA, oil palm shell (OPS), which also from oil palm waste has been used as lightweight aggregates resulting from never ending research conducted. In this investigation, these two types of waste were collected from the same palm oil mills in Kuantan, Malaysia and were both utilized inside lightweight aggregate concrete. By incorporating POFA and OPS as partial cement and coarse aggregate replacement, lightweight aggregate concrete with 35 MPa can be produced and is also significantly higher than control OPS concrete.

Effect of mixing ingredient on workability and compressive strength of palm oil clinker lightweight concrete containing palm oil fuel ash

2018 ◽  
Vol 9 (4) ◽  
pp. 110
Author(s):  
Nur Azzimah Binti Zamri ◽  
Khairunisa Muthusamy ◽  
Andri Kusbiantoro
Keyword(s):  
Palm Oil ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Palm Oil Fuel Ash ◽  
Aggregate Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Concrete Production ◽  
Fuel Ash ◽  
Oil Fuel

Palm oil industry is one of the important industry that contribute to the country’s prosperity. This flourishing industry however also causes environmental problems namely air pollution, soil degradation as well as water pollution due to waste disposal issue. At the same time, intensive cement production and granite mining is damaging the environment and natural habitats. Hence, various efforts have been made by researchers to minimize the effect of pollution including integrating oil palm wastes in construction as building materials. In this study, granite aggregate was fully replaced by palm oil clinker (POC) in lightweight aggregate concrete production. In order to reduce the utilization of cement in concrete, palm oil fuel ash (POFA) was ground to improve its pozzolanic reactivity to partially replace cement in lightweight aggregate concrete. From this investigation, the best performance concrete was attributed by POC LWAC with 20% POFA when the water cement ratio and superplasticizer are 0.45 and 1.0%. Inclusion of water cement ratio and superplasticizer of 0.35 and 0.8% would adversely affects the workability and strength of POC LWAC with POFA.

scholarly journals Modification of Grout Properties in Prepacked Aggregate Concrete Incorporating Palm Oil Fuel Ash

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Reza Hodjati ◽  
Hossein Aslani ◽  
Iman Faridmehr ◽  
A. S. M. Abdul Awal ◽  
Ziba Kazemi
Keyword(s):  
Compressive Strength ◽  
Palm Oil ◽  
Palm Oil Fuel Ash ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Fuel Ash ◽  
Pozzolanic Materials ◽  
Oil Fuel ◽  
Two Stages

Prepacked aggregate concrete (PAC) is a type of concrete that is placed in two stages where the coarse aggregates are first placed inside the formworks and then the grout is pumped from underneath through a manual pump. Grout properties including density, grout consistency, bleeding, and compressive strength are of great importance in PAC. Such properties could be improved by application of pozzolanic materials like palm oil fuel ash. This paper is aimed at finding the most optimum percentage of POFA replacement by weight of cement. It was concluded that 30% POFA replacement yielded the most optimum results.

Sign in / Sign up

Export Citation Format

Share Document