scholarly journals Technical evaluation of proton exchange membrane (PEM) fuel cell performance – A review of the effects of bipolar plates coating

2019 ◽  
Vol 113 ◽  
pp. 109286 ◽  
Author(s):  
Tabbi Wilberforce ◽  
O. Ijaodola ◽  
Emmanuel Ogungbemi ◽  
F.N. Khatib ◽  
T. Leslie ◽  
...  
Energy ◽  
2008 ◽  
Vol 33 (12) ◽  
pp. 1794-1800 ◽  
Author(s):  
Jarupuk Thepkaew ◽  
Apichai Therdthianwong ◽  
Supaporn Therdthianwong

2014 ◽  
Vol 11 (4) ◽  
Author(s):  
Guo Li ◽  
Jinzhu Tan ◽  
Jianming Gong ◽  
Xiaowei Zhang ◽  
Yanchao Xin ◽  
...  

Proton exchange membrane (PEM) fuel cell is regarded as one of the potential renewable energy which may provide a possible long-term solution to reduce carbon dioxide emissions, reduce fossil fuel dependency and increase energy efficiency. Even though great progress has been made, long-term stability and durability is still an issue. The contamination ion plays an important role on the electrical performance of PEM fuel cell. This paper investigates the effect of Mg2+ contamination on PEM fuel cell performance as a function of Mg2+ concentration. Two levels of Mg2+ concentration was chose. From the experimental results, it can be obtained that a significant drop in fuel cell performance occurred when Mg2+ was injected into the anode fuel stream. The voltage and power density of fuel cell decreased larger and larger with increase of Mg2+ concentration over time. The Mg2+ mainly caused the concentration polarization loss from the anode catalyst to the membrane in fuel cell.


Author(s):  
Kristopher Inman ◽  
Xia Wang ◽  
Brian Sangeorzan

Thermal behavior inside fuel cells plays a significant role in fuel cell performance and durability. Internal temperatures of a proton exchange membrane (PEM) fuel cell govern the ionic conductivities of the polymer electrolyte, influence the reaction rate at the electrodes, and control the water vapor pressure inside the cell. Temperature gradients also influence mass transport due to phase-change-induced flow and thermo-osmosis. Many techniques developed for studying in situ temperatures such as thermocouples sensors either disrupt fuel cell performance or carry unknown accuracy. The objectives of this research are to design and construct thermal sensors based on the principles of the lifetime-decay method of phosphor thermometry to measure temperatures of cathode gas diffusion layer inside a PEM fuel cell with minimal invasion. The sensors also demonstrate the possibility of detecting water droplet formation in the flow channels qualitatively making it possible to experimentally relate local temperature distribution with liquid water formation. Further development is required in order to increase the accuracy and utility of the sensors before conclusive testing can be performed.


2021 ◽  
Vol 11 (14) ◽  
pp. 6348
Author(s):  
Zijun Yang ◽  
Bowen Wang ◽  
Xia Sheng ◽  
Yupeng Wang ◽  
Qiang Ren ◽  
...  

The dead-ended anode (DEA) and anode recirculation operations are commonly used to improve the hydrogen utilization of automotive proton exchange membrane (PEM) fuel cells. The cell performance will decline over time due to the nitrogen crossover and liquid water accumulation in the anode. Highly efficient prediction of the short-term degradation behaviors of the PEM fuel cell has great significance. In this paper, we propose a data-driven degradation prediction method based on multivariate polynomial regression (MPR) and artificial neural network (ANN). This method first predicts the initial value of cell performance, and then the cell performance variations over time are predicted to describe the degradation behaviors of the PEM fuel cell. Two cases of degradation data, the PEM fuel cell in the DEA and anode recirculation modes, are employed to train the model and demonstrate the validation of the proposed method. The results show that the mean relative errors predicted by the proposed method are much smaller than those by only using the ANN or MPR. The predictive performance of the two-hidden-layer ANN is significantly better than that of the one-hidden-layer ANN. The performance curves predicted by using the sigmoid activation function are smoother and more realistic than that by using rectified linear unit (ReLU) activation function.


2021 ◽  
Vol 514 ◽  
pp. 230574
Author(s):  
Yannick Garsany ◽  
Robert W. Atkinson ◽  
Benjamin D. Gould ◽  
Rachel Martin ◽  
Laetitia Dubau ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document