scholarly journals Evaluating the Water Vapor Transmission Properties of Summer Cooling Towels

2020 ◽  
Vol 165 ◽  
pp. 05011
Author(s):  
Yim-Ling Lam ◽  
Wenyi Wang ◽  
Chi-Wai Kan ◽  
Nongnut Sasithorn ◽  
Kongkiat Maha-in ◽  
...  

This study evaluated the cooling properties of summer cooling towels of different brands by studying the water vapor transmission behavior. All the samples were found to provide a cooling effect at first contact after being wetted. The samples of N-rit showed the highest cooling effect followed by Cooldyxm and Ice Towel, whereas Perfect Fitness had the poorest cooling effect.

2020 ◽  
Vol 897 ◽  
pp. 30-34
Author(s):  
Yan Ngo Fan ◽  
Wen Yi Wang ◽  
Chi Wai Kan ◽  
Kamol Promlawan ◽  
Wasana Changmuong ◽  
...  

This study evaluated the quick dry properties of summer men’s sportswear T-shirts of different brands (Nike, Adidas, Laishilong and Columbia) by studying the water vapor transmission behavior. The results indicate that Laishilong was the best sample in terms of water vapor transmission rate, whereas Columbia was the poorest. Moreover, samples of Nike, Adidas, Laishilong and Columbia, had similar water vapor transmission rate. This implies that they had comparatively similar performance in water vapor permeability.


2015 ◽  
Vol 18 (3) ◽  
pp. 245-255
Author(s):  
Teodor-Cezar Codau ◽  
Elena Onofrei ◽  
Stojanka Petrusic ◽  
Gauthier Bedek ◽  
Daniel Dupont ◽  
...  

2021 ◽  
Author(s):  
Minho Seok ◽  
Sunghyun Yoon ◽  
Mookyum Kim ◽  
Young-Ho Cho

We present a porous polydimethylsiloxane (PDMS) pulsewave sensor with haircell structures that improves both water vapor transmission rate (WVTR) and signal-to-noise ratio (SNR).


Author(s):  
Réka Lilla Kovács ◽  
Lajos Daróczi ◽  
Péter Barkóczy ◽  
Eszter Baradács ◽  
Eszter Bakonyi ◽  
...  

AbstractIn this work, we evaluate the water vapor transmission rate (WVTR), the permeability (P), solubility (S), and diffusion (D) coefficients of Paraloid B44, Paraloid B72, and Incralac coatings in the temperature range of 5–35°C. The Arrhenius function—diffusion activation energy and preexponential factor—has also been determined from the data: $$D_{B44} = 35.2\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} \exp \left( { - 25\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D B 44 = 35.2 cm 2 s - 1 exp - 25 kJ mol - 1 / RT ; $$D_{B72} = 9.5\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} \exp \left( { - 23\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D B 72 = 9.5 cm 2 s - 1 exp - 23 kJ mol - 1 / RT ; $$D_{\text{Incralac}} = 622.8\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} { \exp }\left( { - 28\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D Incralac = 622.8 cm 2 s - 1 exp - 28 kJ mol - 1 / RT . These resins are important coating materials, for example, for conservators to protect metallic artifacts, such as statues, against corrosion. Despite Paraloid B44 and B72 resins being considered as reference materials in conservation practice, that is, new coating materials (either water vapor retarders or transmitters) are often compared to them, there are no comprehensive data for the quantities describing the vapor permeability (P, S, D) of these materials. The measurements are based on the ISO cup-method using substrate/coating composite samples. The strength of this technique is that it can also be used when the coating is non-self-supporting; nevertheless, P, S, and D can be deduced for the coating layer itself, and it seems to be a standardizable procedure for comparative performance testing of coating materials. Paraloid B72 layers exhibited higher WVTRs—from 39 to 315 g m−2 day−1 as the temperature increased from 5 to 35°C—compared to Paraloid B44 and Incralac coatings—from 17 to 190 g m−2 day−1, respectively. The transmission rate parameters were also compared to the results of corrosion tests. Incralac was the most effective corrosion inhibitor, and the performance of the B44 was better than the B72, which is in good agreement with the transmission rate tests.


Sign in / Sign up

Export Citation Format

Share Document