scholarly journals The application of the EN ISO 52016 standard and its Italian National Annex to assess the heating and cooling needs of a reference office building

2021 ◽  
Vol 312 ◽  
pp. 06003
Author(s):  
Franz Bianco Mauthe Degerfeld ◽  
Ilaria Ballarini ◽  
Giovanna De Luca ◽  
Vincenzo Corrado
Keyword(s):  
Building Energy ◽  
Energy Performance ◽  
Office Building ◽  
Dynamic Calculation ◽  
Building Stock ◽  
Existing Building ◽  
Building Energy Performance ◽  
Heating And Cooling ◽  
Energy Simulations

The EN ISO 52016-1 standard presents a new simplified dynamic calculation procedure, whose aim is to provide an accurate energy performance assessment without excessively increasing the number of data required. The Italian National Annex to EN ISO 52016-1, currently under development, provides some improvements to the hourly calculation method; despite many works can be found in literature on the hourly model of EN ISO 52016-1, the National Annexes application has not been sufficiently analysed yet. The aim of the present work is to assess the main improvements introduced by the Italian National Annex and to compare the main results, in terms of energy need for space heating and cooling. To this purpose, an existing building representative of the Italian office building stock in Northern Italy was selected as a case study. The energy simulations were carried out considering both continuous and reduced operation of the HVAC systems. The options specified in the Italian National Annex were firstly applied one by one, and then all together. The variation of the energy need compared to the international base procedure is finally quantified. For the premises and the scope above discussed, the present work is intended to enhance the standardisation activity towards the adoption of more accurate and trustable calculation methods of the building energy performance.

scholarly journals Thermal mass impact on energy performance of a low, medium and heavy mass building in Belgrade

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 447-459 ◽  
Author(s):  
Bojan Andjelkovic ◽  
Branislav Stojanovic ◽  
Mladen Stojiljkovic ◽  
Jelena Janevski ◽  
Milica Stojanovic
Keyword(s):  
Building Energy ◽  
Energy Performance ◽  
Office Building ◽  
Energy Requirements ◽  
Space Heating ◽  
Thermal Mass ◽  
Mass Concrete ◽  
Building Energy Performance ◽  
Heating And Cooling ◽  
Space Cooling

Heavy mass materials used in building structures and architecture can significantly affect building energy performance and occupant comfort. The purpose of this study was to investigate if thermal mass can improve the internal environment of a building, resulting in lower energy requirements from the mechanical systems. The study was focused on passive building energy performance and compared annual space heating and cooling energy requirements for an office building in Belgrade with several different applications of thermal mass. A three-dimensional building model was generated to represent a typical office building. Building shape, orientation, glazing to wall ratio, envelope insulation thickness, and indoor design conditions were held constant while location and thickness of building mass (concrete) was varied between cases in a series of energy simulations. The results were compared and discussed in terms of the building space heating and cooling energy and demand affected by thermal mass. The simulation results indicated that with addition of thermal mass to the building envelope and structure: 100% of all simulated cases experienced reduced annual space heating energy requirements, 67% of all simulated cases experienced reduced annual space cooling energy requirements, 83% of all simulated cases experienced reduced peak space heating demand and 50% of all simulated cases experienced reduced peak space cooling demand. The study demonstrated that there exists a potential for reducing space heating and cooling energy requirements with heavy mass construction in the analyzed climate region (Belgrade, Serbia).

Defining and demonstrating a smart technology configuration to improve energy performance and occupant comfort in existing buildings: a conceptual framework

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sidney Newton ◽  
Arezoo Shirazi ◽  
Pernille Christensen
Keyword(s):  
Building Energy ◽  
Energy Performance ◽  
Management Control ◽  
Building Stock ◽  
Content Type ◽  
Existing Building ◽  
Building Energy Performance ◽  
Smart Building ◽  
Building Technology ◽  
Occupant Comfort

PurposeTo achieve the building and property by 2050, decarbonisation goals will now require a significant increase in the rate of improvement in the energy performance of buildings. Occupant behaviour is crucial. This study seeks to guide the application of smart building technology in existing building stock to support improved building energy performance and occupant comfort.Design/methodology/approachThis study follows a logical partitioning approach to the development of a schema for building energy performance and occupant comfort. A review of the literature is presented to identify the characteristics that label and structure the problem elements. A smart building technology framework is overlaid on the schema. The framework is then applied to configure and demonstrate an actual technology implementation for existing building stock.FindingsThe developed schema represents the key components and relationships of building energy performance when combined with occupant comfort. This schema provides a basis for the definition of a smart building technologies framework for existing building stock. The study demonstrates a viable configuration of available smart building technologies that couple building energy performance with occupant comfort in the existing building stock. Technical limitations (such as relatively simple building management control regimes) and pragmatic limitations (such as change management issues) are noted for consideration.Originality/valueThis is the first development of a schema to represent how building energy performance can be coupled with occupant comfort in existing building stock using smart building technologies. The demonstration study applies one of many possible technology configurations currently available, and promotes the use of open source applications with push-pull functionality. The schema provides a common basis and guide for future studies.

scholarly journals A Practical Integration Approach and Whole Building Energy Simulation of Three Energy Efficient Building Technologies

2010 ◽  
Author(s):  
James P. Miller ◽  
Michael Deru ◽  
Kyle Benne ◽  
Alexander Zhivov ◽  
Dale Herron
Keyword(s):  
Energy Savings ◽  
Building Energy ◽  
Energy Performance ◽  
Hvac Systems ◽  
Radiant Heating ◽  
Cooling Systems ◽  
Building Envelopes ◽  
Building Energy Performance ◽  
Heating And Cooling ◽  
Energy Simulations

Rising energy costs and the desire to reduce energy consumption dictates a need for significantly improved building energy performance. Three technologies that have potential to save energy and improve sustainability of buildings are dedicated outdoor air systems (DOAS), radiant heating and cooling systems and tighter building envelopes. Although individually applying innovative technologies may incrementally improve building energy performance, more significant payoffs are realized when compatible technologies are integrated into an optimized system. Fortunately, DOAS, radiant heating and cooling systems and improved building envelopes are highly compatible. To investigate the energy savings potential of these three technologies, whole building energy simulations were performed for a barracks facility and an administration facility in 15 U.S. climate zones and 16 international locations. The baseline facilities were assumed to be existing buildings with VAV HVAC systems (admin facilities) and packaged HVAC systems (barracks facilities). The energy simulations were adjusted for each location for optimal energy and humidity control performance. The results show that the upgraded facilities realized total building energy savings between 20% and 40% and improved humidity control when compared to baseline building performance.

Urban building energy modeling considering the heterogeneity of HVAC system stock: A case study on Japanese office building stock

2020 ◽  
Vol 207 ◽  
pp. 109590
Author(s):  
Bumjoon Kim ◽  
Yohei Yamaguchi ◽  
Shun Kimura ◽  
Yumei Ko ◽  
Kosuke Ikeda ◽  
...  
Keyword(s):  
Building Energy ◽  
Energy Modeling ◽  
Office Building ◽  
Hvac System ◽  
Building Energy Modeling ◽  
Building Stock

scholarly journals Building energy modelling for the energy performance analysis of a hospital building in various locations

2019 ◽  
Vol 111 ◽  
pp. 06073 ◽  
Author(s):  
Ioan Silviu Dobosi ◽  
Cristina Tanasa ◽  
Nicoleta-Elena Kaba ◽  
Adrian Retezan ◽  
Dragos Mihaila
Keyword(s):  
European Union ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
The European Union ◽  
Total Energy Consumption ◽  
Building Stock ◽  
Heating And Cooling ◽  
Key Factor ◽  
Hospital Building

The building sector has been identified as having the greatest energy reduction potential and therefore represents a key factor for the European Union climate change combat objectives of achieving an 80-95% greenhouse gas emissions reduction by 2050. Hospitals buildings represent 7% of the nonresidential building stock in the European Union and are responsible for approximately 10% of the total energy consumption in this sector. The design and construction of hospital buildings is a complex and challenging activity for all the involved specialists, especially when energy performance is one of the objectives. This paper discusses the energy performance simulation on an hourly basis of a new hospital building that was constructed in the city of Mioveni, Romania. At this stage of the study, the building energy model solely investigates the performance of the building envelope, without modelling the HVAC system. The complexity of the building model derives from the multitude of thermal zones depending on interior temperature and ventilation air changes conditions. Several simulations are performed investigating the heating and cooling energy need depending on the building location.

Sign in / Sign up

Export Citation Format

Share Document