Aerodynamic Design and Shape Optimization with the Far-Field Drag Decomposition Approach

In the aerodynamic shape design, the drag prediction has always been an extremely challenging mission for the exploration of a configuration. As for the more complex configurations, it is especially desired to the availability of a highly accurate and reliable aerodynamic numerical solution. For improving the drag prediction accuracy and promoting the aerodynamic shape designs, firstly, the characteristics of drag prediction based on far-field drag method and near-field drag method is analyzed and compared. Also, the merits and demerits of defining axial velocity defect with the current main far-field drag prediction approaches is summarized, which promotes the building of the improved method of axial velocity defect and the improved far-field drag prediction and decomposition approach. Moreover, during the establishment of the drag decomposition method, it is necessary to judge and decide on the selection of the drag region. Therefore, the discussions on the sensitivity of the relevant parameters are fulfilled. Furthermore, based on the far-field drag prediction and decomposition method constructed, the aerodynamic performance research of Common Research Model wing-body configuration is launched. The results show that it can effectively observe and analyze the changes in drag components, their impact on the total drag and the contribution percentage. Finally, combining the far-field drag prediction and decomposition method proposed in this paper with a gradient-based aerodynamic shape optimization design system, the aerodynamic shape optimization designs are studied with CRM wing-body configuration. The results can not only directly analyze the detailed change of the visualized drag region, but also can obtain the more accurate total drag and lift-to-drag ratio of the optimized configuration by removing the spurious drag.