Assessment of Pile Group Response to Lateral Spreading by Single Pile Analysis

Author(s):  
Misko Cubrinovski ◽  
Kenji Ishihara
2013 ◽  
Vol 51 ◽  
pp. 35-46 ◽  
Author(s):  
Ramin Motamed ◽  
Ikuo Towhata ◽  
Tsuyoshi Honda ◽  
Kentaro Tabata ◽  
Akio Abe

2019 ◽  
Vol 5 (11) ◽  
pp. 2377-2391
Author(s):  
Aseel Kahlan Mahmood ◽  
Jasim M Abbas

This paper is presented the lateral dynamic response of pile groups embedded in dry sand under influence of vertical loads and the pile shape in-group, which are subjected to the lateral two-way cyclic loads. The laboratory typical tests with pile groups (2×1) have an aluminum-pipe (i.e. circular, square) pile, embedded length to diameter of pile ratio (L/D=40) and spacing to diameter ratio (S/D) of 3, 5, 7 and 9 are used with different cyclic-load ratio (CLR) 0.4, 0.6 and 0.8. The experimental results are revealed that both the vertical and lateral pile capacity and displacement is significantly affected by the cyclic-loading factors i.e. (number of cycles, cyclic load ratio, and shape of pile) .In this study, important design references are presented. Which are explained that the response of the pile groups under cyclic lateral loading are clear affected by the attendance of vertical load and pile shape. Where, it is reduction the lateral displacement of group piles head and increase lateral capacity about (50) % compared without vertical loads. On the other side, the pile shape is a well affected to the pile response where the level of decline in lateral displacement at the pile groups head in the square pile is more than circular pile about 20 % at the same load intensity.


2021 ◽  
Vol 147 (12) ◽  
Author(s):  
Yixian Wang ◽  
Jian Liu ◽  
Panpan Guo ◽  
Wei Zhang ◽  
Hang Lin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document