scholarly journals Fall Control of Japanese Beetle Grubs with Conventional and Experimental Formulations on Turfgrass in Wayne Pa, 1993

1994 ◽  
Vol 19 (1) ◽  
pp. 312-312
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Creeping Bentgrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Japanese Beetle ◽  
Annual Bluegrass ◽  
Water Ph ◽  
Loam Soil

Abstract The turfgrass area consisted primarily of annual bluegrass (50%) and creeping bentgrass (50%). Treatment plots were 9 × 6 ft, arranged in a RCB design and replicated 3 times. Granular formulations were applied with a hand-held shaker and mixed with a fine grade top-dressing sand to facilitate product distribution. Liquid formulations were applied with a CO2 compressed air sprayer with 4 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. At treatment time (23 Aug) the following soil and environmental conditions existed: air temperature, 66°F; soil temperature at 1 inch depth, 70°F; soil temperature at 2 inch, 69°F; RH, 85%; amount of thatch, 0.125 inches; soil type, loam; soil particle size analysis: 37.0% sand, 45.0% silt, 18.0% clay; organic matter, 5.0%; soil moisture (oven baked), 31.6; water pH, 7.0; soil pH, 5.1; and overcast skies. Immediately after treatment the experimental area was irrigated with 0.5 inches of water. Posttreatment counts were made 49 DAT (11 Oct). Japanese beetle grub control was evaluated by removing four 0.087 ft2 sod samples from each replicate, and the total number of grubs were recorded and converted to a ft2 count. Sod samples were removed with a 4 inch diam cup cutter.

scholarly journals Management of Japanese Beetle Grubs with Formulations of Dylox, Oftanol, and Turcam on a Golf Fairway in Centre County, Pa, 1994

1995 ◽  
Vol 20 (1) ◽  
pp. 282-282
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Kentucky Bluegrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Japanese Beetle ◽  
Natural Rainfall ◽  
Water Ph ◽  
Loam Soil

Abstract The turfgrass area consisted primarily of annual bluegrass (20%), Kentucky bluegrass (40%), and perennial ryegrass (40%). Treatment plots were 9 × 6 ft, arranged in a RCB design, replicated 3 times. Liquid formulations were applied with a CO, compressed air sprayer with 4 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. Granular formulations were applied with a hand-held shaker and mixed with a fine grade top-dressing sand to facilitate product distribution. At treatment time (25 Aug) the following soil and environmental conditions existed: air temperature, 81°F; soil temperature at 1 inch depth, 74°F; soil temperature at 2 inch, 72°F; RH, 76%; amount of thatch, 0.125-0.25 inches; soil type, loam; soil particle size analysis: 43.6% sand, 36.4% silt, 20.0% clay; organic matter, 7.6%; soil moisture (oven baked), 31.3%; water pH, 6-7; soil pH, 6.6; and clear skies. Immediately after treatment the experimental area was irrigated with 0.2 inches of water. Three hours prior to treatment the area received 0.3 inches of natural rainfall. Posttreatment counts were completed on 28 Sep. Three ft2 sod samples were taken from each replicate, and the total number of viable Japanese beetle grubs/ft2 was recorded.

scholarly journals Preventive Management of White Grubs with 1.5-G Formulations of Halofenozide and Mach-2 Liquid Insecticide, 1997

1998 ◽  
Vol 23 (1) ◽  
pp. 332-332
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Kentucky Bluegrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Japanese Beetle ◽  
White Grubs ◽  
Water Ph ◽  
Loam Soil

Abstract The turfgrass area, located in Carbon County, PA, consisted primarily of Kentucky bluegrass (40%), annual bluegrass (40%), and perennial ryegrass (20%). Treatment plots were 8 X 6 ft, arranged in a RCB design and replicated 3 times. Liquid formulations were applied by using z CO2 sprayer with 4 8002VS TeeJet nozzles mounted on a 6-ft boom, operating at 28 psi, and applied in 500 ml of water/48 ft2 or delivering 2.7 gal/lOOC ft2. Granular formulations were applied with a hand-held shaker and mixed with fine top-dressing sand to facilitate product distribution. At treatment time (19 Aug), the following soil and environmental conditions existed: air temperature, 70° F; soil temperature at 1-inch depth, 69° F; soil temperature at 2 inch, 69° F; RH, 68%; amount of thatch, 0.5-0.625 inch; soil textural class, silt loam to loam; soil particle size analysis; sand, 39.4%; silt, 50.5%; clay 10.1%; organic matter, 20.9%; soil percent water content (percent by weight), 36.3; water pH, 7.0; soil pH, 6.8; application time, mid-morning; and skies cloudy. Immediately after treatment select treatments were irrigated in with 0.2 inch of water. Post-treatment counts were made on 7 Oct. Three ft2 soc samples were randomly taken from each replicate, and the total number of Japanese beetle grubs/ft2 was recorded.

scholarly journals Midsummer Management of Japanese Beetle Grubs with Merit 75WSP on a Golf Course Fairway in Lewistown, Pa, 1994

1995 ◽  
Vol 20 (1) ◽  
pp. 281-281
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Kentucky Bluegrass ◽  
Particle Size Analysis ◽  
Golf Course ◽  
Size Analysis ◽  
Japanese Beetle ◽  
Annual Bluegrass ◽  
Water Ph ◽  
Loam Soil

Abstract The fairway consisted primarily of annual bluegrass (40%), Kentucky bluegrass (40%), and perennial ryegrass (20%). Treatment plots were 9 × 6 ft, arranged in a RCB design, replicated 3 times. Liquid formulations were applied with a CO2 compressed air sprayer with 4 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. At treatment time (26 Jul) the following soil and environmental conditions existed: air temperature, 72°F; soil temperature at 1 inch depth, 76CF; soil temperature at 2 inch, 74°F; RH, 85%; amount of thatch, 0.25-0.50 inches; soil type, loam; soil particle size analysis: 31.1% sand, 46.4% silt, 22.5% clay; organic matter, 6.7%; soil moisture (oven baked) 23.1%; water pH, 6-7; soil pH, 4.4; and partly cloudy skies. Immediately after treatment the experimental area was irrigated with 0.25 inches of water. Posttreatment counts were made 42 DAT (6 Sep). Three ft2 sod samples were randomly taken from each replicate, and the total number of Japanese beetle grubs ft2 was recorded.

scholarly journals Evaluation of Merit Formulations to Control Green June Beetle Grubs on a Golf Course Fairway in Wayne, Pa, 1994

1995 ◽  
Vol 20 (1) ◽  
pp. 280-280
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Clay Soil ◽  
Treatment Time ◽  
Creeping Bentgrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Water Ph ◽  
Loam Soil ◽  
Green June Beetle

Abstract The fairway consisted primarily of annual bluegrass (50%) and creeping bentgrass (50%). Treatment plots were 9 × 6 ft, arranged in a RCBD, replicated 3 times. Liquid formulations were applied by using a CO2 compressed air sprayer with 4 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. Granular formulations were applied with a hand held shaker and mixed with topdressing sand to facilitate product distribution. At treatment time (25 May), the following soil and environmental conditions existed: air temperature, 80°F; soil temperature at 1 inch depth, 80°F; soil temperature at 2 inch depth, 76°F; RH, 78%; amount of thatch, 0.125 inches; soil type, silt loam; soil particle size analysis: 24.5% sand, 60.6% silt, 14.9% clay; soil moisture (oven baked), 31.8%; organic matter, 8.0%; water pH, 6-7; soil pH, 4.8; and cloudy skies. Immediately after treatment the experimental area was irrigated with 0.25 inches of water. Counts were made 118 DAT (20 Sep). The total number of new freshly constructed green June beetle burrows were recorded from each replicate (54 ft2).

scholarly journals Evaluation of Dursban, Sevin, Talstar, and Experimental Formulations for Management of Japanese Beetle Grubs on a Golf Course Rough in Carbon County, Pennsylvania, 1995

1996 ◽  
Vol 21 (1) ◽  
pp. 339-339
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Sandy Loam ◽  
Dry Weight ◽  
Kentucky Bluegrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Japanese Beetle ◽  
Water Ph

Abstract The turfgrass area consisted primarily of annual bluegrass (40%), Kentucky bluegrass (40%), and perennial ryegrass (20%). Treatment plots were 9 X 6 ft, arranged in a RCB design and replicated 3 times. Granular formulations were applied with a hand-held shaker and mixed with a fine grade top-dressing sand to facilitate product distribution. At treatment time (22 Aug) the following soil and environmental conditions existed: air temperature, 74°F; soil temperature at 1 inch depth, 82°F; soil temperature at 2 inch, 80°F; RH, 54%; amount of thatch, 0.375-0.5 inches; soil textural class, loamy sand to sandy loam; soil particle size analysis: 74.8% sand, 20.5% silt, 4.7% clay; organic matter, 23.8%; soil moisture (oven dry weight), 40.2; water pH, 7; soil pH, 6.2; application time, mid-morning; and clear skies. Immediately after treatment the experimental area was irrigated with 0.3 inch of water. Posttreatment counts were completed on 3 Oct. Three ft2 sod samples were taken from each replicate, and the total number of viable Japanese beetle grubs/ft2 was recorded.

scholarly journals Evaluation of Merit to Control Green June Beetle Grubs on a Golf Course Fairway in Wayne, Penn-Sylvania, 1995

1996 ◽  
Vol 21 (1) ◽  
pp. 336-336
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Observation Interval ◽  
Block Design ◽  
Creeping Bentgrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Water Ph ◽  
Green June Beetle

Abstract The fairway consisted primarily of annual bluegrass (50%) and creeping bentgrass (50%). Treatment plots were 9 X 6 ft, arranged in a randomized complete block design and replicated 3 times. Liquid formulations were applied by using a CO2 compressed air sprayer with 4 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and applied in 1021 ml of water/54 ft2 or delivering 5 gal/1000 ft2. Granular treatments were applied with a fine grade top-dressing sand to facilitate product distribution. At treatment time (6 Jun), the following soil and environmental conditions existed: air temperature, 77°F; soil temperature at 1 inch depth, 80°F; soil temperature at 2 inch depth, 78°F; RH, 74%; amount of thatch, 0.25-0.5 inches; soil textural class, silt-loam; soil particle size analysis: 32.1% sand, 53.8% silt, 14.2% clay; soil moisture (oven dried), 31.1%; organic matter, 8.3%; water pH, 6.5; soil pH, 5.2; application time, late-morning; and cloudy skies. Immediately after treatment the experimental area was irrigated with 0.3 inch of water. Posttreatment counts were made on 6 Sep. The total number of new freshly constructed green June beetle burrows was recorded from each replicate (54 ft2) as well as the total number of green June beetle larvae flushed to the surface following an application of Sevin 80WSP over a 24 hr observation interval.

scholarly journals Evaluation of Rh0345 and Turcam 76Wp for Management of Japanese Beetle Grubs on a Golf Course Rough in Carbon County, Pennsylvania, 1995

1996 ◽  
Vol 21 (1) ◽  
pp. 339-339
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Sandy Loam ◽  
Dry Weight ◽  
Kentucky Bluegrass ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Japanese Beetle ◽  
Water Ph

Abstract The turfgrass area consisted primarily of annual bluegrass (40%), Kentucky bluegrass (40%), and perennial ryegrass (20%). Treatment plots were 9 X 6 ft, arranged in a RCB design, replicated 3 times. Liquid formulations were applied with a CO2 compressed air sprayer with four 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and applied in 1021 ml of water/54 ft2 or delivering 5 gal water/1,000 ft2. Granular treatments were applied with a fine grade top-dressing sand to facilitate product distribution. At treatment time (10 Jul) the following soil and environmental conditions existed: air temperature, 83°F; soil temperature at 1 inch depth, 88°F; soil temperature at 2 inch, 80°F; RH, 60%; amount of thatch, 0.375-0.5 inches; soil textural class, sandy loam; soil particle size analysis: 67.0% sand, 28.6% silt, 4.5% clay; organic matter, 22.0%; soil moisture (oven dry weight), 67.1; water pH, 7; soil pH, 6.4; application time, mid-afternoon; and overcast skies. Immediately after treatment the experimental area was irrigated with 0.175 inch of water and 0.1 inch irrigation 14 hr after treatment. Posttreatment counts were completed on 2 Oct. Three ft2 sod samples were taken from each replicate, and the total number of viable Japanese beetle grubs/ft2 was recorded.

scholarly journals Suppression of Annual Bluegrass Weevil on a Golf Course Fairway with Split Applications of Chlor-Pyrifos and Experimental Formulations, 1996

1997 ◽  
Vol 22 (1) ◽  
pp. 362-362
Author(s):  
P.R. Heller ◽  
R. Walker
Keyword(s):  
Particle Size ◽  
Soil Temperature ◽  
Treatment Time ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Application Time ◽  
Annual Bluegrass ◽  
Water Ph ◽  
Loam Soil ◽  
Annual Bluegrass Weevil

Abstract The fairway consisted primarily of annual bluegrass (70%) and Kentucky bluegrass (30%) in Bedford County, PA. Applications were made when flowering dogwood was in full bloom. Treatment plots were 6 X 6 ft, arranged in a RCB design and replicated 4 times. Liquid formulations were applied with a CO2 compressed air sprayer with four 8004VS TeeJet nozzles mounted on a 6 fi boom, operating at 28 psi, and applied in 272 ml of water/36 ft2 or delivering 2 gal water/1,000 ft2. At the 1st treatment time (14 May), the following soil and environmental conditions existed: air temperature, 57°F; soil temperature at 1 inch depth, 64°F; soil temperature at 2 inch depth, 60°F; RH, 35% amount of thatch, 0.25-0.50 inches; soil textural class, loam; soil particle size analysis: 27.4% sand, 46.9% silt, 25.8% clay; soil moisture (oven dry weight) 46.6%; organic matter, 6.8%; water pH, 7; soil pH, 5.9; application time, mid-morning; and clear skies. The experimental area was irrigated with 0.1 inch 24 hr after treatment. At the 2nd treatment time (31 May), the following soil and environmental conditions existed: application time, late-morning; air tem perature, 61°F; soil temperature at 1 inch depth, 64°F; soil temperature at 2-inch depth, 58°F; RH, 48%; amount of thatch, 0.25-0.50 inch; soil texturai class, loam; soil particle size analysis: 27.4% sand, 46.9% silt, 25.8% clay; organic matter, 6.8%; soil condition, moist; water pH, 7; soil pH, 5.9; and cleai skies. The experimental area was irrigated with 0.1 inch 1 hr after treatment. Post-treatment counts were made on 19 Jun. Annual bluegrass weevil con trol was evaluated by removing three 4-inch cup cutter sod samples from each replicate and recording the total number of annual bluegrass weevil life stages (larva, pupa, adult) per sample. Totals were then converted to a ft2 count.

Evaluation to Manage Annual Bluegrass Weevil on a Golf Course Fairway with Vector Tl and Dursban in Bedford County, Pa, 1994

1995 ◽  
Vol 20 (1) ◽  
pp. 281-281
Author(s):  
P. R. Heller ◽  
R. Walker ◽  
C. Silcox
Keyword(s):  
Soil Temperature ◽  
Clay Soil ◽  
Treatment Time ◽  
Kentucky Bluegrass ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Annual Bluegrass ◽  
Water Ph ◽  
Loam Soil ◽  
Annual Bluegrass Weevil

Abstract The fairway consisted primarily of annual bluegrass (70%) and Kentucky bluegrass (30%). Treatment plots were 9 × 6 ft, arranged in a RCB design, replicated 4 times. Two ft barriers were placed between each treatment replicate. Liquid formulations were applied with a CO2 compressed air sprayer with four 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. At treatment time (23 May), the following soil and environmental conditions existed: air temperature, 84°F; soil temperature at 1 inch depth, 68°F; soil temperature at 2 inch depth, 64°F; RH, 38%; amount of thatch, 0.0625-0.125 inches; soil type, soil-loam; soil particle size analysis: 27.0% sand, 51.8% silt, 21.2% clay; soil moisture (oven baked), 37.7%; organic matter, 8.9%; water pH, 6-7; soil pH, 6.3; and skies were clear. Immediately after treatment, each replicate was irrigated with 0.25 inches of water. Posttreatment counts were made 23 DAT (15 Jun). Annual bluegrass weevil control was evaluated by removing four 0.087 ft2 sod samples from each replicate, and the total number of annual bluegrass weevil life stages (larva, pupa, adult) were recorded and converted to a ft2 count. Sod samples were removed with a 4 inch cup cutter.

scholarly journals Summer Management of Hairy Chinch Bug with Formulations of Imidacloprid and Carbaryl on Es-Tablished Fescue Turfgrass in Somerset, Pennsylvania, 1995

1996 ◽  
Vol 21 (1) ◽  
pp. 356-356
Author(s):  
P. R. Heller ◽  
R. Walker
Keyword(s):  
Soil Temperature ◽  
Treatment Time ◽  
Dry Weight ◽  
Product Distribution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Steel Cylinder ◽  
Chinch Bug ◽  
Water Ph ◽  
Loam Soil

Abstract The turfgrass area consisted primarily of fine leafed fescue. Treatment plots were 5 X 6 ft arranged in a RCB design, replicated 3 times. Granular formulations were applied with a hand held shaker and mixed with fine top dressing sand to facilitate product distribution. At treatment time (25 Jul) the following soil and environmental conditions existed: air temperature, 81° F; soil temperature at 1 inch depth, 88° F; soil temperature at 2 inch depth, 79° F; RH, 61.0%; amount of thatch, 0.5-1.0 inches; soil textural class, silt loam; soil particle size analysis: 28.8% sand, 50.4% silt, 20.9% clay; soil moisture (oven dry weight), 23.5%; organic matter, 7.9%; water pH, 7.0; soil pH, 5.8; application time, early evening; and sunny skies. Immediately after treatment the area was irrigated with 0.125 inch of water. Hairy chinch bugs were sampled by driving a 6 inch-diam stainless steel cylinder into the turf, filling it with water, and counting the number of chinch bug nymphs and adults floating to the surface during a 10 min period (sampling dates, Aug 17 and Aug 30). Three flotation samples were taken randomly from each replicate. The total number of chinch bugs from each sample was recorded and converted to a ft2 count.

Sign in / Sign up

Export Citation Format

Share Document