Evaluation to Manage Annual Bluegrass Weevil on a Golf Course Fairway with Vector Tl and Dursban in Bedford County, Pa, 1994
Abstract The fairway consisted primarily of annual bluegrass (70%) and Kentucky bluegrass (30%). Treatment plots were 9 × 6 ft, arranged in a RCB design, replicated 4 times. Two ft barriers were placed between each treatment replicate. Liquid formulations were applied with a CO2 compressed air sprayer with four 8004VS TeeJet nozzles mounted on a 6 ft boom, operating at 28 psi, and delivering 5 gal/1000 ft2. At treatment time (23 May), the following soil and environmental conditions existed: air temperature, 84°F; soil temperature at 1 inch depth, 68°F; soil temperature at 2 inch depth, 64°F; RH, 38%; amount of thatch, 0.0625-0.125 inches; soil type, soil-loam; soil particle size analysis: 27.0% sand, 51.8% silt, 21.2% clay; soil moisture (oven baked), 37.7%; organic matter, 8.9%; water pH, 6-7; soil pH, 6.3; and skies were clear. Immediately after treatment, each replicate was irrigated with 0.25 inches of water. Posttreatment counts were made 23 DAT (15 Jun). Annual bluegrass weevil control was evaluated by removing four 0.087 ft2 sod samples from each replicate, and the total number of annual bluegrass weevil life stages (larva, pupa, adult) were recorded and converted to a ft2 count. Sod samples were removed with a 4 inch cup cutter.