Medium voltage distribution network traveling wave fault location method based on wavelet packet energy spectrum

2011 ◽  
Author(s):  
HaiFeng Zhao ◽  
YuLin Qi ◽  
HuiBin Jia
Keyword(s):  
Energy Spectrum ◽  
Traveling Wave ◽  
Fault Location ◽  
Wavelet Packet ◽  
Distribution Network ◽  
Voltage Distribution ◽  
Location Method ◽  
Medium Voltage

A Novel Fault-location Method for HVDC Transmission Lines Based on Concentric Relaxation Principle and Wavelet Packet

2020 ◽  
Vol 13 (5) ◽  
pp. 705-716
Author(s):  
Congshan Li ◽  
Ping He ◽  
Feng Wang ◽  
Cunxiang Yang ◽  
Yukun Tao ◽  
...  
Keyword(s):  
Transmission Lines ◽  
Traveling Wave ◽  
Fault Location ◽  
Wave Attenuation ◽  
Wavelet Packet ◽  
Low Frequency ◽  
Evaluation Process ◽  
Location Method ◽  
Hvdc Transmission ◽  
Instantaneous Energy

Background: A novel fault location method of HVDC transmission line based on a concentric relaxation principle is proposed in this paper. Methods: Due to the different position of fault, the instantaneous energy measured from rectifier and inverter are different, and the ratio k between them is the relationship to the fault location d. Through the analysis of amplitude-frequency characteristics, we found that the wave attenuation characteristic of low frequency in the traveling wave is stable, and the amplitude of energy is larger, so we get the instantaneous energy ratio by using the low-frequency data. By using the method of wavelet packet decomposition, the voltage traveling wave signal was decomposed. Results: Finally, calculate the value k. By using the data fitting, the relative function of k and d can be got, that is the fault location function. Conclusion: After an exhaustive evaluation process considering different fault locations, fault resistances, and noise on the unipolar DC transmission system, four-machine two-area AC/DC parallel system, and an actual complex grid, the method presented here showed a very accurate and robust behavior.

A Traveling Wave-Based Fault Location Method Employing VMD-TEO for Distribution Network

2020 ◽  
Vol 35 (4) ◽  
pp. 1987-1998 ◽  
Author(s):  
Liwei Xie ◽  
Longfu Luo ◽  
Yong Li ◽  
Yu Zhang ◽  
Yijia Cao
Keyword(s):  
Traveling Wave ◽  
Fault Location ◽  
Distribution Network ◽  
Location Method

scholarly journals Evaluation of earth fault location algorithm in medium voltage distribution network with correction technique

2019 ◽  
Vol 9 (3) ◽  
pp. 1987
Author(s):  
N. S. B. Jamili ◽  
M. R. Adzman ◽  
S. R. A. Rahim ◽  
S. M. Zali ◽  
M. Isa ◽  
...  
Keyword(s):  
Fault Location ◽  
Distribution Network ◽  
Distance Estimation ◽  
Voltage Distribution ◽  
Medium Voltage ◽  
Earth Fault ◽  
Ground Fault ◽  
The Earth ◽  
Correction Technique ◽  
Location Algorithm

This paper focused on studying an algorithm of earth fault location in the medium voltage distribution network. In power system network, most of the earth fault occurs is a single line to ground fault. A medium voltage distribution network with resistance earthing at the main substation and an earth fault attached along the distribution network is modeled in ATP Draw. The generated earth fault is simulated, and the voltage and current signal produced is recorded. The earth fault location algorithm is simulated and tested in MATLAB. The accuracy of the earth fault location algorithm is tested at several locations and fault resistances. A possible correction technique is explained to minimize the error. The results show an improvement fault location distance estimation with minimum error.

Sign in / Sign up

Export Citation Format

Share Document