Active Power Control of Wind Power Generation by Wide Area Control System for Improvement of Transient Stability in Power Systems

Author(s):  
Jun Itai ◽  
Kenichi Kawabe ◽  
Toshiya Nanahara
Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1329 ◽  
Author(s):  
Hongwei Li ◽  
Kaide Ren ◽  
Shuaibing Li ◽  
Haiying Dong

To deal with the randomness and uncertainty of the wind power generation process, this paper proposes the use of the clustering method to complement the multi-model predictive control algorithm for active power control. Firstly, the fuzzy clustering algorithm is adopted to classify actual measured data; then, the forgetting factor recursive least square method is used to establish the multi-model of the system as the prediction model. Secondly, the model predictive controller is designed to use the measured wind speed as disturbance, the pitch angle as the control variable, and the active power as the output. Finally, the parameters and measured data of wind generators in operation in Western China are adopted for simulation and verification. Compared to the single model prediction control method, the adaptive multi-model predictive control method can yield a much higher prediction accuracy, which can significantly eliminate the instability in the process of wind power generation.


2020 ◽  
Author(s):  
Ângelo Marcílio M. dos Santos ◽  
Vanessa Siqueira de C. Teixeira ◽  
Ricardo Parcelle C. Pacífico ◽  
Leonardo P. S. Silva ◽  
Marcos Vinícius S. França ◽  
...  

The main contribution of this paper is to present a proposal for the development of an active power filter (APF) for a wind power generation system connected to the electric grid, using the three-phase induction generator with squirrel cage rotor (SCIG). In the induction generator side converter (IGSC) the power control is done by the magnetizing current and electromagnetic torque in coordinates dq. Thus, the wind system controls the active and reactive powers, as well as performing the active filtering function in the grid currents. Harmonic compensation is performed by an algorithm applied to the grid side converter (GSC). That technique improves the power quality and keeps the voltage at DC bus. The studied system was mathematically modeled and simulated using the Matlab / Simulink software. When SCIG provides 2 kW of active power, the THD from 18,94% (without APF) was reduced to 3,93% for GSC operating with APF function.


2013 ◽  
Vol 860-863 ◽  
pp. 389-393
Author(s):  
Tao Zhan ◽  
Jian Xin Sun ◽  
Hua Pu Chen

Based on a "wind power remote monitoring system" project, this paper focus on the modeling and simulation of the wind power variant pitch control system, and also the wind generator active power control OPC CLIENT interface programming. Using the VC++ language and MFC, OPC CLIENT interface was designed for the start-stop control of fan and the active power control of wind farms, which enables the wind farm to accurate and rapid response of the wind power grid load instruction of automatic generation control (AGC). Further, based on the MATLAB/SIMULINK platform, we analyzed the variable pitch control system of the variable pitch wind turbine by modeling and simulation with the Denmark's VESTAS V80-2000 (2MV).


2019 ◽  
Vol 30 (6) ◽  
pp. 1116-1125 ◽  
Author(s):  
Alexandre P. Sohn ◽  
Maurício B. de C. Salles ◽  
Luís F. C. Alberto

Sign in / Sign up

Export Citation Format

Share Document