scholarly journals Closure to “Discussions of ‘Skin Friction and Heat Transfer for Laminar Boundary-Layer Flow With Variable Properties and Variable Free-Stream Velocity’” (1954, ASME J. Appl. Mech., 21, pp. 89–90)

1954 ◽  
Vol 21 (1) ◽  
pp. 90
Author(s):  
S. Levy ◽  
R. A. Seban
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Skin Friction ◽  
Laminar Boundary Layer ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Free Stream Velocity ◽  
Stream Velocity ◽  
Variable Properties ◽  
Layer Flow

Skin Friction and Heat Transfer for Laminar Boundary-Layer Flow With Variable Properties and Variable Free-Stream Velocity

1953 ◽  
Vol 20 (3) ◽  
pp. 415-421
Author(s):  
S. Levy ◽  
R. A. Seban
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Prandtl Number ◽  
Skin Friction ◽  
Laminar Boundary Layer ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Free Stream Velocity ◽  
Stream Velocity ◽  
Layer Flow

Abstract Numerical solutions of the momentum and energy equations are presented for particular types of laminar boundary-layer flow analogous to the Hartree “wedge flows.” Variation of the viscosity and of the thermal conductivity is considered under the circumstances of no dissipation, favorable pressure gradient, and the product of conductivity and density a constant. The solution is based on approximate representations of the velocity and temperature profiles in the boundary layer and these are of such character that the labor of calculation is minimized and the accuracy of the results preserved. The differential equations are reduced to two algebraic equations which rapidly yield the skin friction and the heat transfer in terms of the wall to free-stream temperature ratio for the desired value of Prandtl number. Numerical results are given for a range of wedge flows with gases of Prandtl number 0.70 and 1.0. These results reveal that when the free-stream velocity is variable the temperature difference between the wall and the free stream exerts a substantial effect on the velocity distribution in the boundary layer and on the skin-friction coefficient. Alternatively, the heat-transfer coefficient is not affected radically. A calculation method is presented for the determination of the heat transfer and skin friction for a flow with an arbitrary variation of velocity over an isothermal surface. This method utilizes the results of the present analysis for the variable property wedge flows.

Influence of Free-Stream Turbulence on Turbulent Boundary Layer Heat Transfer and Mean Profile Development, Part I—Experimental Data

1983 ◽  
Vol 105 (1) ◽  
pp. 33-40 ◽  
Author(s):  
M. F. Blair
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Full Range ◽  
Stream Velocity ◽  
Free Stream Turbulence ◽  
Turbulent Boundary Layer Flow ◽  
Layer Flow

An experimental research program was conducted to determine the influence of free-stream turbulence on zero pressure gradient, fully turbulent boundary layer flow. Connective heat transfer coefficients and boundary layer mean velocity and temperature profile data were obtained for a constant free-stream velocity of 30 m/s and free-stream turbulence intensities ranging from approximately 1/4 to 7 percent. Free-stream multicomponent turbulence intensity, longitudinal integral scale, and spectral distributions were obtained for the full range of turbulence levels. The test results with 1/4 percent free-stream turbulence indicate that these data were in excellent agreement with classic two-dimensional, low free-stream turbulence, turbulent boundary layer correlations. For fully turbulent boundary layer flow, both the skin friction and heat transfer were found to be substantially increased (up to ∼ 20 percent) for the higher levels of free-stream turbulence. Detailed results of the experimental study are presented in the present paper (Part I). A comprehensive analysis is provided in a companion paper (Part II).

Sign in / Sign up

Export Citation Format

Share Document