The Role of Emulsified Water in the Wax Deposition Path of a Waxy Crude Oil Multiphase Transportation Pipeline

Author(s):  
Xinyu Lin ◽  
Zhihua Wang ◽  
Qingshan Feng ◽  
Lei Zhang ◽  
Yunfei Xu

Abstract Although the problem of wax deposition in multiphase transportation pipelines have been addressed and some related wax deposition models have been developed in recent years, the complex wax deposition paths derived from the potential variety of flow regimes in multiphase flow have not been well understood. This study presented a method for characterizing wax crystals aggregation behavior and developed a model for describing wax deposition path in oil/water two-phase flows. The impact of the emulsified water droplets on wax crystals aggregation in shearing flows was quantified using polarized light microscopy and image analysis method. The role of the emulsified water droplets in the wax deposition path reaching the upper side and lower side of pipeline wall was discussed by solving the developed model which involves the possible inclination angle of multiphase transportation pipeline. The availability of the mechanistic model was validated by the data and knowledge in the existing literature. The results indicated that wax crystals morphologies and structures tended to be regular with the enhancement of shearing effect, and their aggregation behavior were restrained. The circular degree and particle size of wax crystals showed a characteristic that it firstly increased and then decreased with the accumulation of emulsified water droplets in shearing flow, and this transition appeared to the phase inversion point of the oil/water two-phase. The velocity for wax crystals depositing to pipeline wall decreased and the time for wax crystals depositing to pipeline wall extended with the existence of emulsified water droplets. The wax deposition path became more complex in multiphase transportation, and such effect became remarkable when the dispersity of oil/water two-phase enhanced. Accordingly, the intractable wax deposition of waxy crude oil in cold environment transportation would be mitigated to some extent. This study contributes to comprehending the distinction of wax deposition mechanism in single-phase and multiphase transportation of waxy crude oil, and the proposed method and model are valuable for further predicting wax deposition in waxy crude oil emulsions pipelines. The findings in this study also point out an approach to conducting cost-effective flow assurance operations in crude oil production and transportation.

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
Yi Zhao ◽  
Xiangdong Qi ◽  
Zhihua Wang ◽  
Kegang Ling ◽  
Zhenhua Rui

Abstract Although the problems of wax deposition in multiphase transportation pipelines have been addressed and wax deposition models have been developed in recent years, the complex wax deposition paths derived from the potential variety of flow regimes in multiphase flow have not been well understood. This study presented a method for characterizing wax crystals aggregation and developed a model for describing the wax deposition path in oil−water two-phase flows. The effect of the emulsified water droplets on wax crystals aggregation in shearing flows was identified using the polarized light microscopy and image analysis method. The role of the emulsified water droplets in the wax deposition path reaching the upper side and lower side of the pipeline wall was discussed by solving the developed model which involves the possible inclination angle of the multiphase transportation pipeline. The availability of the mechanistic model was validated by the data and knowledge in the existing literature. The results indicated that the circular degree and particle size of wax crystals showed a characteristic that it first increased and then decreased with the accumulation of emulsified water droplets in shearing flow, and this transition appeared to the phase inversion point of the oil−water two-phase. The wax deposition path was complex in multiphase transportation. The velocity for wax crystals depositing to the pipeline wall decreased, and the time for wax crystals depositing to the pipeline wall extended with the existence of emulsified water droplets. This behavior became remarkable when the dispersion stability of the oil−water two-phase enhanced.


2017 ◽  
Vol 164 ◽  
pp. 313-332 ◽  
Author(s):  
Ali Piroozian ◽  
Mahmoud Hemmati ◽  
Issham Ismail ◽  
Muhammad A. Manan ◽  
Mohammad M. Rashidi ◽  
...  

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Zhihua Wang ◽  
Hankun Wang ◽  
Chaoliang Zhu ◽  
Zhenhua Rui ◽  
Yang Liu

Abstract The aggregation behavior and the subsequent deposition behavior of wax crystals own undesirable effects on the production and transportation of waxy crude oil. The understanding and prediction of these behaviors are essential to ensure economic and uninterrupted flow of waxy crude oil when the oil temperature decreases below the wax appearance temperature (WAT). In this paper, a novel method of fractal dimensional analysis was introduced to elucidate the aggregation behavior of wax crystals in different shear flow fields. The fractal methodology for characterizing wax crystal aggregation was then developed, and a blanket algorithm was introduced to compute the fractal dimension of the aggregated wax crystals. Considering the flow characteristics of waxy crude oil in a pipeline can be correlated with the shearing stress work, a modified wax deposition model focusing on shearing energy analysis was established. The results indicate that a quantitative interpretation of the wax crystal aggregation behavior can be realized using the fractal methodology. The aggregation behavior of the wax crystals is closely related to the temperature and shearing experienced by the waxy crude oil. The aggregation behavior will be intensified with decreasing temperature and shearing effect, and a wider fractal dimension distribution appears at lower temperatures when the same shear rate range is used. Furthermore, the improved model provides a method for discussing the effects of the operating conditions on wax deposition. The average relative deviation between the improved model prediction results and experimental results from the literature is 3.01–5.32%.


2014 ◽  
Vol 931-932 ◽  
pp. 1243-1247 ◽  
Author(s):  
Issham Ismail ◽  
Shahir Misnan ◽  
Ahmad Shamsul Izwan Ismail ◽  
Rahmat Mohsin

Water produced along with the crude oil during production and transported together in a pipeline is a common occurrence in a petroleum production system. Understanding the behavior of crude oil-water flow in a pipe is crucial to engineering applications such as design and operation of flow lines and wells, and separation systems. Presently, there was no two phase flow study done on the Malaysian waxy crude oil-water. Therefore, a research work was conducted at the Malaysia Petroleum Resources Corporation Institute for Oil and Gas, Universiti Teknologi Malaysia to study the flow pattern of the Malaysian waxy crude oil-water flowing in a closed-loop system at the ambient condition through a 5.08 cm ID stainless steel horizontal pipeline. The research works comprised fluid characterization and flow pattern observation using a video camera camcorder. Five flow patterns have been identified, namely stratified wavy flow, stratified wavy with semi dispersed flow at interface and oil film, dispersion of water in oil and oil continuous with emulsion, dispersion of oil in water with water continuous, and the newly found semi dispersed flow with semi emulsion at interface and thin oil film. The experimental results could be used as a platform to understand better a more complex case of gas, oil, and water flow in a pipeline, which is of utmost importance in designing optimum surface facilities.


2014 ◽  
Vol 931-932 ◽  
pp. 1248-1252 ◽  
Author(s):  
Issham Ismail ◽  
Shahir Misnan ◽  
Ahmad Shamsul Izwan Ismail ◽  
Rahmat Mohsin

Understanding the pressure drop and water holdup of crude oil-water flow in a pipe is crucial to many engineering applications. Free water in contact with the pipes wall can cause erosion or corrosion problems. An experimental research was conducted at the Malaysia Petroleum Resources Corporation Institute for Oil and Gas, Universiti Teknologi Malaysia to study the pressure drop and water holdup of the Malaysian waxy crude oil-water flowing in a closed-loop system at ambient condition through a 5.08 cm ID stainless steel horizontal pipeline. In the research work, water cuts were varied from 0 - 90% with mixture velocities ranging from 0.1 0.8 m/s. The research works comprised fluid characterization, pressure drop, and liquid holdup measurement.The investigations proved that pressure drop increased with flow rates, while the water holdup was found to have decreased slightly at higher water cuts due to the presence of emulsion in the crude oil a challenge when using a waxy crude oil in a two phase flow system. The experimental results can be used as a platform to understand better a more complex case of liquid-liquid two phase flow.


2021 ◽  
Author(s):  
Yuanhao Li ◽  
Jian Zhao ◽  
Hang Dong ◽  
Xiangrui Xi

The microstructure and dynamical behaviors of wax crystals in waxy crude oil are the fundamental reasons for a series of physical phenomena in the process of transportation. In order to...


2021 ◽  
Author(s):  
Jian Zhao ◽  
Xiangrui Xi ◽  
Hang Dong ◽  
Yuanhao Li ◽  
Minzheng Jiang

The high-efficient development, storage and transportation of waxy crude oil has a significant meaning for stable supplying of petroleum energy. The variety of complex morphology and microstructure of wax crystals...


2018 ◽  
Vol 32 (10) ◽  
pp. 10605-10615 ◽  
Author(s):  
Haoran Zhu ◽  
Chuanxian Li ◽  
Fei Yang ◽  
Hongye Liu ◽  
Dinghong Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document