Evaluation on Constraint Effect of Reactor Pressure Vessel Under Pressurized Thermal Shock

2013 ◽  
Author(s):  
Naoki Ogawa ◽  
Kentaro Yoshimoto ◽  
Takatoshi Hirota ◽  
Shohei Sakaguchi ◽  
Toru Oumaya
Keyword(s):  
Fracture Toughness ◽  
Thermal Shock ◽  
Surface Crack ◽  
Pressure Vessel ◽  
Crack Tip ◽  
Reactor Pressure Vessel ◽  
Constraint Effect ◽  
Elastic Plastic ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

In recent years, the integrity of reactor pressure vessel (RPV) under pressurized thermal shock (PTS) accident has become controversial issue since the larger shift of RTNDT in some higher fluence surveillance data raised a concern on RPV integrity. Under PTS condition, the combination of thermal stress due to a temperature gradient and mechanical stress due to internal pressure causes considerable tensile stress inside the wall of RPV. Currently, RPV integrity is assessed by comparing stress intensity factor on a crack tip under PTS condition and a reference toughness curve based on the fracture toughness data of irradiated compact specimens. Since PTS loading is large enough to cause plastic deformation, a crack tip behavior on the inner surface of RPV can be explained by elastic-plastic fracture mechanics using the J-integral. In this study, 3D elastic plastic finite element analyses were performed to assess the crack tip behavior on surface of a RPV under Loss of coolant Accident, which causes one of the most severe PTS condition. In order to quantify the constraint effect on a surface crack, J-Q approach was applied. The constraint effect of a surface crack was compared with a compact specimen and its influence on the fracture toughness was assessed. As a result, the difference of constraint effect was clearly obtained. And it is recommended to consider constraint effects in the evaluation of structural integrity of RPV under PTS.

Constraint Effect on Fracture Mechanics Evaluation for an Under-Clad Crack in a Reactor Pressure Vessel Steel

2020 ◽  
Author(s):  
Masaki Shimodaira ◽  
Tohru Tobita ◽  
Hisashi Takamizawa ◽  
Jinya Katsuyama ◽  
Satoshi Hanawa
Keyword(s):  
Fracture Toughness ◽  
Surface Crack ◽  
Pressure Vessel ◽  
Crack Tip ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Constraint Effect ◽  
Rpv Steel ◽  
Low Constraint ◽  
Reactor Pressure

Abstract For structural integrity assessment of the reactor pressure vessel (RPV) in JEAC 4206-2016, it is required that the fracture toughness (KJc) be higher than the stress intensity factor at the crack tip of a postulated under-clad crack (UCC) near the inner surface of RPV steel under the pressurized thermal shock event. Previous analytical studies showed a low constraint effect at the crack tip of an UCC, compared with that of a normal surface crack. Such a low constraint effect may increase the apparent KJc. In this study, we performed three-point bending (3PB) fracture toughness tests and finite element analysis (FEA) for RPV steel containing an UCC or a surface crack to quantitatively investigate the effect of cladding on the KJc. The FEAs considering the anisotropic property of the cladding successfully reproduced the load vs. load-line displacement curves obtained from the tests. We found that the apparent KJc for the UCC was considerably higher than that for the surface crack. FEA also showed that the constraint effect for the 3PB test specimen with the UCC was lower than that for the specimen with the surface crack owing to the cladding. Thus, a low constraint effect from an UCC may increase the apparent KJc.

Computational studies on pressurized thermal shock in reactor pressure vessel

2021 ◽  
Vol 152 ◽  
pp. 107987
Author(s):  
Rakesh Chouhan ◽  
Anuj Kumar Kansal ◽  
Naresh Kumar Maheshwari ◽  
Avaneesh Sharma
Keyword(s):  
Thermal Shock ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Computational Studies ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

Structural Reliability Evaluation on the Pressurized Water Reactor Pressure Vessel Under Pressurized Thermal Shock Events

2014 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

The failure probability of the pressurized water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been evaluated according to the technical basis of the USNRC’s new pressurized thermal shock (PTS) screening criteria. The ORNL’s FAVOR code and the PNNL’s flaw models are employed to perform the probabilistic fracture mechanics analysis based on the plant specific parameters of the domestic reactor pressure vessel. Meanwhile, the PTS thermal hydraulic and the probabilistic risk assessment data analyzed from a similar nuclear power plant in the United States for establishing the new PTS rule are applied as the loading condition. Besides, an RT-based regression formula derived by the USNRC is also utilized to verify the through-wall cracking frequencies. It is found that the through-wall cracking of the analyzed reactor pressure vessel only occurs during the PTS events resulted from the stuck-open primary safety relief valves that later reclose, but with only an insignificant failure risk. The results indicate that the Taiwan domestic PWR reactor pressure vessel has sufficient structural margin for the PTS attack until either the end-of-license or for the proposed extended operation.

Sign in / Sign up

Export Citation Format

Share Document