A regression‐based approach for simulating feedforward active noise control, with regression diagnostics for assessing the impact of measurement noise

1993 ◽  
Vol 94 (3) ◽  
pp. 1816-1816
Author(s):  
C. E. Ruckman ◽  
Chris R. Fuller
Keyword(s):  
Noise Control ◽  
Active Noise Control ◽  
Measurement Noise ◽  
Regression Diagnostics ◽  
Active Noise ◽  
The Impact

Active Noise Control Using Phase-Compensated, Damped Resonant Filters

2005 ◽  
Vol 128 (2) ◽  
pp. 148-155 ◽  
Author(s):  
Jesse B. Bisnette ◽  
Adam K. Smith ◽  
Jeffrey S. Vipperman ◽  
Daniel D. Budny
Keyword(s):  
Noise Control ◽  
Control Method ◽  
Active Noise Control ◽  
Control Device ◽  
Modal Control ◽  
Pass Filter ◽  
Acoustic Transducers ◽  
Active Noise ◽  
The Impact ◽  
Resonant Filters

An active noise control device called active noise absorber or ANA, which is based upon damped, resonant filters is developed and demonstrated. It is similar to structural positive position feedback (PPF) control, with two exceptions: (1) Acoustic transducers (microphone and speaker) cannot be truly collocated, and (2) the acoustic actuator (loudspeaker) has significant dynamics. The speaker dynamics can affect performance and stability and must be compensated. While acoustic modal control approaches are typically not sought, there are a number of applications where controlling a few room modes is adequate. A model of a duct with speakers at each end is developed and used to demonstrate the control method, including the impact of the speaker dynamics. An all-pass filter is used to provide phase compensation and improve controller performance and permits the control of nonminimum phase plants. A companion experimental study validated the simulation results and demonstrated nearly 8 dB of control in the first duct mode. A multi-modal control example was also demonstrated producing an average of 3 dB of control in the first four duct modes.

Active Noise Control Using Phase-Compensated, Damped Resonant Filters

2003 ◽  
Author(s):  
Jesse B. Bisnette ◽  
Jeffrey S. Vipperman ◽  
Daniel D. Budny
Keyword(s):  
Noise Control ◽  
Control Method ◽  
Active Noise Control ◽  
Control Device ◽  
Pass Filter ◽  
Acoustic Transducers ◽  
Active Noise ◽  
Controller Performance ◽  
The Impact ◽  
Resonant Filters

An active noise control device called active noise absorber (ANA), which is based upon damped, resonant filters is developed and demonstrated. It is similar to structural positive position feedback (PPF) control, with two exceptions: 1) acoustic transducers (microphone and speaker) can not be truly colocated, and 2) the acoustic actuator (loudspeaker) has significant dynamics. The speaker dynamics can affect performance and stability and must be compensated. While acoustic modal control approaches are typically not sought, there are a number of applications where controlling a few room modes is adequate. A model of a duct with speakers at each end is developed and used to demonstrate the control method, including the impact of the speaker dynamics. An all-pass filter is used to provide phase compensation and improve controller performance. A companion experimental study validated the simulation result and demonstrated nearly 10 dB of control in the first duct mode.

Sign in / Sign up

Export Citation Format

Share Document