Polarographic and voltammetric determination of 6-nitrobenzimidazole and mechanism of its electrochemical reduction

2009 ◽  
Vol 74 (10) ◽  
pp. 1443-1454 ◽  
Author(s):  
Dana Deýlová ◽  
Jiří Barek ◽  
Vlastimil Vyskočil
Keyword(s):  
Electrochemical Reduction ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Optimal Conditions ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Constant Potential ◽  
Pulse Voltammetry

Optimal conditions were found for the determination of 6-nitrobenzimidazole by tast polarography (at 1 × 10–4–1 × 10–6 mol l–1), by differential pulse polarography at dropping mercury electrode (at 1 × 10–4–1 × 10–7 mol l–1), and by differential pulse voltammetry at hanging mercury drop electrode (at 1 × 10–4–1 × 10–8 mol l–1). Practical applicability of the developed methods was verified on the determination of 6-nitrobenzimidazole in drinking water (at 10–8 mol l–1). Coulometry at constant potential and cyclic voltammetry were used for elucidation of the mechanism of electrochemical reduction.

The polarographic and voltammetric determination of congo red

1987 ◽  
Vol 52 (4) ◽  
pp. 867-877
Author(s):  
Jiří Barek ◽  
Barbara Tietzová ◽  
Jiří Zima
Keyword(s):  
Congo Red ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Polarographic Reduction ◽  
Optimal Conditions ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

The polarographic reduction of the bisazodye congo red has been studied, a mechanism was proposed for this process and optimal conditions were found for determination of this substance by TAST polarography and differential pulse polarography at a dropping mercury electrode and using fast scan differential pulse voltammetry and voltammetry with linearly increasing voltage at a hanging mercury drop electrode. The detection limit for the latter two techniques is about 10-8 mol l-1; a further decrease in the value can be attained by prior accumulation of the determined substance by adsorption on the surface of the working electrode.

The polarographic and voltammetric determination of 5-(3-phenoxysulphenylazo)-6-hydroxy-3-cyano-1,4-dimethyl-2-pyridone

1989 ◽  
Vol 54 (8) ◽  
pp. 2105-2119 ◽  
Author(s):  
Jiří Barek ◽  
Ivana Švagrová-Hauserová ◽  
Jiří Zima
Keyword(s):  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Determination Limit ◽  
Polarographic Reduction ◽  
Optimal Conditions ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Layer Chromatography

The polarographic reduction of the title azodye has been studied, a mechanism was proposed and optimal conditions were found for the determination of this substance by TAST polarography in the range 5.10-5-2.10-6 mol l-1 and differential pulse polarography at a dropping mercury electrode in the range 5.10-5-2.10-8 mol l-1. The sensitivity was further increased by adsorptive accumulation of the determined substance on the surface of a hanging mercury drop electrode with linear scan voltammetry (determination limit 5.10-10 mol l-1). The selectivity was increased by prior separation of the determined azodye using thin layer chromatography and by transferring the substance adsorbed on the surface of the hanging mercury drop to a new base electrolyte solution.

Polarographic and Voltammetric Determination of 1-Nitropyrene

2000 ◽  
Vol 65 (12) ◽  
pp. 1888-1896 ◽  
Author(s):  
Jiří Barek ◽  
Jiří Zima ◽  
Josino C. Moreira ◽  
Alexandr Muck
Keyword(s):  
Mercury Electrode ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Optimum Conditions ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry ◽  
The Given

The polarographic behaviour of 1-nitropyrene was investigated by tast polarography, differential pulse polarography (both with a dropping mercury electrode), differential pulse voltammetry, and adsorptive stripping voltammetry (both with a hanging mercury drop electrode). Optimum conditions have been found for its determination by the given methods in the concentration ranges 2-100, 0.2-100, 0.1-10, and 0.001-0.01 μmol l-1, respectively.

The polarographic and voltammetric determination of the 3'-halogen derivatives of N,N-dimethyl-4-aminoazobenzene

1990 ◽  
Vol 55 (12) ◽  
pp. 2904-2913 ◽  
Author(s):  
Jiří Barek ◽  
Jana Kubíčková ◽  
Viktor Mejstřík ◽  
Oldřich Petira ◽  
Jiří Zima
Keyword(s):  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Polarographic Reduction ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry ◽  
Mixed Water ◽  
Derivatives Of

The polarographic reduction of the 3'-halogen derivatives of N,N-dimethyl-4-aminoazobenzene was studied in mixed water-methanol medium and optimum conditions were found for the determination of these genotoxic substances by tast polarography in the concentration range 1 . 10-4 to 2 . 10-6 mol l-1, differential pulse polarography at a dropping mercury electrode in the range 1 . 10-4 to 2 . 10-7 mol l-1 and fast scan differential pulse voltammetry at a hanging mercury drop electrode in the range 1 . 10-6 to 2 . 10-8 mol l-1. The increase in the sensitivity resulting from adsorptive accumulation of the studied substances on the surface of a hanging mercury drop can be utilized in the determination using the latter method in the concentration range 1 . 10-8 to 2 . 10-9 mol l-1.

Polarographic and Voltammetric Determination of Submicromolar Concentrations of Genotoxic 1,5-Dinitronaphthalene

2004 ◽  
Vol 69 (11) ◽  
pp. 2021-2035 ◽  
Author(s):  
Kumaran Shanmugam ◽  
Jiří Barek ◽  
Jiří Zima
Keyword(s):  
Differential Pulse Voltammetry ◽  
Mercury Electrode ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Hanging Mercury Drop Electrode ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

Polarographic and voltammetric behavior of 1,5-dinitronaphthalene was investigated using tast polarography and differential pulse polarography at a classic dropping mercury electrode and differential pulse voltammetry and adsorptive stripping voltammetry at a hanging mercury drop electrode. Optimum conditions have been found for the determination of tested substance in the concentration range 2-10 μmol l-1 in tast polarography, 0.2-1 μmol l-1 in differential pulse polarography at a classic dropping mercury electrode or differential pulse voltammetry at a hanging mercury drop electrode, and 0.02-0.1 μmol l-1 using adsorptive stripping voltammetry. A possible mechanism of the electrochemical reduction of 1,5-dinitronaphthalene at mercury electrodes is discussed.

The polarographic and voltammetric determination of N,N-dimethyl-4-amino-3'-methylazobenzene

1987 ◽  
Vol 52 (9) ◽  
pp. 2149-2159 ◽  
Author(s):  
Jiří Barek ◽  
Tibor J. Pastor ◽  
Simona Votavová ◽  
Jiří Zima
Keyword(s):  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Polarographic Reduction ◽  
Pulse Polarography ◽  
Practical Usefulness ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry ◽  
Layer Chromatography

The polarographic reduction of N,N-dimethyl-4-amino-3'-methylazobenzene has been studied, a mechanism has been proposed and conditions have been found for the determination of this depolarizer using TAST polarography and differential pulse polarography at a classical dropping mercury electrode and using fast scan differential pulse voltammetry and linear scan voltammetry at a hanging mercury drop electrode. The detection limit at this electrode is about 10-8 mol l-1; a further decrease can be attained using adsorption accumulation of the determined azo-substance on the surface of the working electrode. In conclusion, the practical usefulness of these methods combined with extraction or thin-layer chromatography was verified.

Polarographic and Voltammetric Determination of Chlorobenzene, Benzyl Chloride and Melphalan

1992 ◽  
Vol 57 (3) ◽  
pp. 450-456 ◽  
Author(s):  
Jiří Barek ◽  
Jaroslav Matějka ◽  
Jiří Zima
Keyword(s):  
Benzyl Chloride ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Water Medium ◽  
Pulse Polarography ◽  
Half Wave ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

Conditions were found for the determination of chlorobenzene and benzyl chloride in dimethylformamide and of Melphalan in ethanol-water medium (4 : 1) using tast polarography at a classical dropping mercury electrode in the concentration range 1 . 10-3 - 2 . 10-5 mol l-1. Differential pulse polarography permits the range for the determination of benzyl chloride to be extended to 1 . 10-5 - 2 . 10-6 mol l-1. The use of fast scan differential pulse voltammetry and linear scan voltammetry at a hanging mercury drop electrode did not lead to an increase in the sensitivity of the determination because of the very negative half-wave potential values and high irreversibility of the processes involved.

The polarographic and voltammetric determination of trypane blue

1988 ◽  
Vol 53 (5) ◽  
pp. 921-928
Author(s):  
Jiří Barek ◽  
Janina Balsiene ◽  
Barbara Tietzová ◽  
Jiří Zima
Keyword(s):  
Detection Limit ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Hanging Mercury Drop Electrode ◽  
Mercury Drop Electrode ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

The reduction of mutagenic bisazodye trypane blue has been studied at a mercury electrode, a mechanism has been proposed and optimal conditions found for its analytical application. The use of a dropping mercury electrode with a renewable surface yielded a detection limit of 8 . 10-7 mol l-1 for TAST polarography, and 8 . 10-8 mol l-1 for differential pulse polarography; the use of a hanging mercury drop electrode with an unrenewed surface during the measurement yielded detection limit of 6 . 10-8 mol l-1 for fast scan differential pulse voltammetry and 4 . 10-8 mol l-1 for linear scan voltammetry. Preliminary adsorptive accumulation of the determined substance on the surface of the hanging mercury drop electrode led to a decrease in the detection limit to 5 . 10-9 mol l-1 for linear scan voltammetry.

The polarographic and voltammetric determination of 1-phenyl-5-hydroxy-3-carbamoylpyrazol-4-azo-(4'-ethoxycarbonylbenzene)

1987 ◽  
Vol 52 (1) ◽  
pp. 81-87 ◽  
Author(s):  
Jiří Barek ◽  
Dagmar Civišová
Keyword(s):  
Detection Limit ◽  
Differential Pulse Voltammetry ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Polarographic Reduction ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

The polarographic reduction of the title azodye has been studied, a mechanism has been proposed for this process and conditions have been found for the determination of this substance by TAST polarography, with a detection limit of 7 . 10-7 mol l-1, differential pulse polarography at a dropping mercury electrode with a detection limit of 3.5 . 10-7 mol l-1, fast scan differential pulse voltammetry at a static mercury drop electrode with a detection limit of 6.9 . 10-9 mol l-1 and voltammetry with linearly increasing voltage at a hanging mercury drop with a detection limit of 1.6 . 10-9 mol l-1.

Determination of platinum in biological material by differential pulse polarography: Analysis in urine, plasma and tissue following sample combustion

1983 ◽  
Vol 48 (10) ◽  
pp. 2903-2908 ◽  
Author(s):  
Viktor Vrabec ◽  
Oldřich Vrána ◽  
Vladimír Kleinwächter
Keyword(s):  
Biological Material ◽  
Biological Fluid ◽  
Mercury Electrode ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Linear Calibration ◽  
Catalytic Current ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode

A method is described for determining total platinum content in urine, blood plasma and tissues of patients or experimental animals receiving cis-dichlorodiamineplatinum(II). The method is based on drying and combustion of the biological material in a muffle furnace. The product of the combustion is dissolved successively in aqua regia, hydrochloric acid and ethylenediamine. The resulting platinum-ethylenediamine complex yields a catalytic current at a dropping mercury electrode allowing to determine platinum by differential pulse polarography. Platinum levels of c. 50-1 000 ng per ml of the biological fluid or per 0.5 g of a tissue can readily be analyzed with a linear calibration.

Sign in / Sign up

Export Citation Format

Share Document