Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

2016 ◽  
Author(s):  
Keyword(s):  
Shear Strength ◽  
Test Method ◽  
Horizontal Shear ◽  
Reinforced Plastic ◽  
Short Beam ◽  
Beam Method

Analytical and Experimental Studies of Short-Beam Interlaminar Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures

2000 ◽  
Vol 123 (1) ◽  
pp. 112-118 ◽  
Author(s):  
Y. Shindo ◽  
R. Wang ◽  
K. Horiguchi
Keyword(s):  
Shear Strength ◽  
Interlaminar Shear Strength ◽  
Thickness Ratio ◽  
Test Method ◽  
Scanning Electron Micrographs ◽  
Glass Cloth ◽  
Specimen Width ◽  
Short Beam ◽  
Beam Shear ◽  
Interlaminar Shear

Cryogenic interlaminar beam tests in the form of three-point flexure are examined both experimentally and analytically. The use of the short-beam shear test for measuring the interlaminar shear strength of glass-cloth/epoxy laminates at low temperatures is evaluated first. The interlaminar shear tests were carried out with short-beam shear specimens at room temperature, 77 K and 4 K to evaluate the interlaminar shear strength of G-10CR glass-cloth/epoxy laminates. Each specimen was placed on two roller supports that allow lateral motion and a load was applied directly at the center of the specimen. These tests were conducted in accordance with ASTM, 1984, “Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method,” Designation D2344-84. The effects of temperature, specimen width, and span-to-thickness ratio on the apparent interlaminar shear strength are shown graphically. Photomicrographs (scanning electron micrographs, optical micrographs) of actual failure modes were utilized to verify the failure mechanisms. A three-dimensional finite element analysis was also performed to investigate the effects of specimen width and span-to-thickness ratio on the shear stress distribution in the mid-plane. Effective elastic moduli were determined under the assumption of uniform strain inside the representative volume element. The numerical findings are then correlated with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document