The past two decades have seen significant efforts to standardize a series of simplified test methods to characterize the dynamic modulus (DM) and repeated load permanent deformation (RLPD) performance characteristics of asphalt mixtures using the asphalt mixtures performance tester (AMPT). While the current AASHTO T 79 test specifications for the AMPT are faster and easier to perform than their preceding research grade test protocols, there is still reluctance among highway agencies and industry to conduct performance testing using the AMPT. One significant reason is the lengthy process of sample preparation and testing for the DM and RLPD tests. Two studies to expedite this process are reported here. First, the potential for abbreviating the DM testing procedure was examined. It provides the option to fully exclude testing at 40°C by adding an additional frequency of 0.01 Hz at 20°C. This approach reduces time for testing as well as for sample conditioning at high temperature. Second, the possibility of reducing the total number of required specimens was evaluated. The variation of the DM under repetitive testing and the appropriateness of performing the RLPD test on samples already tested for DM were evaluated. The results showed that specimen damage or densification because of DM testing is insignificant. As a consequence, DM test specimens can be re-used for RLPD testing, reducing the required number of samples from 12 to 9.
Spectral degree of linear polarization and neutral points of polarization in snow and ice surfaces
