Abstract
Previous research has indicated that starch gelatinization during the pelleting process is greater for Enogen® Feed corn compared to conventional yellow dent corn. Increasing starch gelatinization in the pellet increases the starch digestibility in the pig, which potentially leads to increased growth rate. Therefore, the objective of this study was to determine the effects of feeding Enogen Feed corn in meal or pellet form on finishing pig growth performance and carcass characteristics. A total of 288 pigs (53.0 ± 0.5 kg) were used with 8 pigs/pen and 9 pens/treatment in a 72-d study. Treatments were arranged in a 2×2 factorial with main effects of corn source (Enogen Feed corn or conventional yellow dent corn) and diet form (meal or pellet). Main effects of corn source and diet form as well as their interactions were tested. Pelleting parameters were established with a target conditioner temperature of 82.2°C and corn moisture of 13 to 14%. When pelleting the diets, the conditioning temperature for conventional yellow dent corn averaged 68.4°C and Enogen Feed corn averaged 67.7°C. The hot pellet temperature for conventional yellow dent corn averaged 75.1°C and 75.8°C for Enogen feed corn. For overall performance (d 0 to 72), no interactions between corn source and diet form were observed (P > 0.05). There was a tendency (P < 0.10) for slightly improved average daily gain (ADG) and gain:feed ratio (G:F) for pigs fed conventional yellow dent corn compared to those fed Enogen Feed corn. Pigs fed pelleted diets had increased (P < 0.001) ADG, G:F, and hot carcass weight compared to pigs fed meal diets. In summary, feeding pelleted diets to finishing pigs increased ADG and G:F compared to those fed meal-based diets. There were no major differences observed between corn sources or interactions between corn source and diet form on growth performance.
Interactive effects between paylean™ (Ractopamine HCl) and dietary lysine on finishing pig growth performance, carcass characteristics and tissue accretion