scholarly journals Radio Environment Analysis at Balai Cerap KUSZA for Solar Burst Study

2017 ◽  
Vol 7 (4) ◽  
pp. 1441
Author(s):  
Marhamah Mohd Shafie ◽  
Roslan Umar ◽  
Nor Hazmin Sabri ◽  
Nur Zulaikha Mohd Afandi ◽  
Zainol Abidin Ibrahim
Keyword(s):  
Environment Analysis ◽  
Solar Burst

Evaluation of Acoustic Analyses of Voice in Nonoptimized Conditions

2020 ◽  
Vol 63 (12) ◽  
pp. 3991-3999
Author(s):  
Benjamin van der Woerd ◽  
Min Wu ◽  
Vijay Parsa ◽  
Philip C. Doyle ◽  
Kevin Fung
Keyword(s):  
Repeated Measures ◽  
Voice Quality ◽  
Data Sets ◽  
Acoustic Measurements ◽  
Sample Collection ◽  
Experimental Conditions ◽  
Environment Analysis ◽  
Acoustic Measures ◽  
Recording Conditions ◽  
Cepstral Peak Prominence

Objectives This study aimed to evaluate the fidelity and accuracy of a smartphone microphone and recording environment on acoustic measurements of voice. Method A prospective cohort proof-of-concept study. Two sets of prerecorded samples (a) sustained vowels (/a/) and (b) Rainbow Passage sentence were played for recording via the internal iPhone microphone and the Blue Yeti USB microphone in two recording environments: a sound-treated booth and quiet office setting. Recordings were presented using a calibrated mannequin speaker with a fixed signal intensity (69 dBA), at a fixed distance (15 in.). Each set of recordings (iPhone—audio booth, Blue Yeti—audio booth, iPhone—office, and Blue Yeti—office), was time-windowed to ensure the same signal was evaluated for each condition. Acoustic measures of voice including fundamental frequency ( f o ), jitter, shimmer, harmonic-to-noise ratio (HNR), and cepstral peak prominence (CPP), were generated using a widely used analysis program (Praat Version 6.0.50). The data gathered were compared using a repeated measures analysis of variance. Two separate data sets were used. The set of vowel samples included both pathologic ( n = 10) and normal ( n = 10), male ( n = 5) and female ( n = 15) speakers. The set of sentence stimuli ranged in perceived voice quality from normal to severely disordered with an equal number of male ( n = 12) and female ( n = 12) speakers evaluated. Results The vowel analyses indicated that the jitter, shimmer, HNR, and CPP were significantly different based on microphone choice and shimmer, HNR, and CPP were significantly different based on the recording environment. Analysis of sentences revealed a statistically significant impact of recording environment and microphone type on HNR and CPP. While statistically significant, the differences across the experimental conditions for a subset of the acoustic measures (viz., jitter and CPP) have shown differences that fell within their respective normative ranges. Conclusions Both microphone and recording setting resulted in significant differences across several acoustic measurements. However, a subset of the acoustic measures that were statistically significant across the recording conditions showed small overall differences that are unlikely to have clinical significance in interpretation. For these acoustic measures, the present data suggest that, although a sound-treated setting is ideal for voice sample collection, a smartphone microphone can capture acceptable recordings for acoustic signal analysis.

AN UNUSUAL SOLAR BURST AT DECAMETER WAVELENGTHS. 1. OBSERVATIONS

2012 ◽  
Vol 3 (4) ◽  
pp. 279-284 ◽  
Author(s):  
A. I. Brazhenko ◽  
V. N. Melnik ◽  
Alexandr A. Konovalenko ◽  
V. V. Dorovsky ◽  
A. V. Frantsuzenko ◽  
...  
Keyword(s):  
Solar Burst

Comparison of corrosion resistance properties of Ni-P and Ni-W-P coatings obtained by electroless deposition

2020 ◽  
Vol 25 (2) ◽  
pp. 66-71
Author(s):  
A.B. Drovosekov
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Electroless Deposition ◽  
Corrosion Damage ◽  
Electrochemical Activity ◽  
High Porosity ◽  
Environment Analysis ◽  
Damage Degree ◽  
Lower Porosity ◽  
Electroless Coatings

Corrosion resistance properties, such as porosity, stability in the atmosphere of NaCl mist, and anodic electrochemical activity in a sulfuric acid solution are studied and compared for Ni-W-P and Ni-P coatings obtained by electroless deposition. The studied coatings were obtained from solutions with glycine as the main ligand and contained 10.2 to 15.6 at.% of phosphorus and up to 3.3 at.% of tungsten. It is shown that Ni-W-P coatings with a tungsten content of 2.3 to 3.3 at.% and a thickness of 15 μm have a significantly lower porosity as compared with nickel-phosphorus coatings of the same thickness. Also, significantly better stability of Ni-W-P coatings in a NaCl mist atmosphere was observed, their corrosion damage degree is less than that of Ni-P coatings, and relatively little depends on the duration of exposure in a corrosive environment. Analysis of anodic polarization curves showed an almost similar electrochemical activity upon dissolution of Ni-P and Ni-W-P coatings in sulfuric acid. Both these types of electroless coatings showed a markedly better tendency to anodic dissolution than pure nickel. Taking into account the obtained experimental data, a conclusion is made as to the better protective characteristics of Ni-W-P coatings in comparison with nickel-phosphorus coatings. The main reason of the inferior protective properties of Ni-P coatings is their relatively high porosity.

Sign in / Sign up

Export Citation Format

Share Document