Use of Finite Element Analysis to Engineer the Cement Sheath for Production Operations

2004 ◽  
Author(s):  
F. Tahmourpour ◽  
J.E. Griffith
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Analysis ◽  
Cement Sheath

Mechanically Enhanced Cementing: Mitigation Against Sustained Casing Pressure in Highly Stressed Downhole Environment, Offshore Niger Delta

2021 ◽  
Author(s):  
Ilyas Abdulsalaam ◽  
Chibuzor Amos ◽  
Grace Ahabike ◽  
Rebecca Ejukorlem-Okusi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Niger Delta ◽  
Cement Slurry ◽  
Element Analysis ◽  
Well Production ◽  
Sustained Casing Pressure ◽  
Remaining Capacity ◽  
Cement Sheath ◽  
Casing Pressure

Abstract A major Exploration and Production (E & P) company was posed with a challenge of sustained casing pressure in over 85% of the wells drilled in one of the fields in the Offshore Niger Delta. Sustained casing pressure occurs when the annular seal is damaged and a path is created for the formation pressure to reach the surface, and the pressure in the annulus rebuilds after being bled down. When cementing in such an environment, operators have the following objectives: Placing a cement sheath with increased capability to survive future downhole stress events.Achieving effective mud removal.Gaining the benefits of a react and respond sheath design.Providing a long productive life for the wellbore. To develop a cement system that would achieve and maintain isolation throughout the life of the well, an advanced cement technology was required. This advanced cement technology involved Finite Element Analysis (FEA) to model the effects of stresses from well operations on the cement sheath. This analysis takes into consideration well configuration, formation properties, casing properties, cement properties and operational loads and predicts the remaining capacities of the cement sheath. The remaining capacity is used to measure how much a cement sheath is stressed. After simulating the effect of downhole stresses on a cement sheath, a mechanically enhanced cement slurry was designed to meet the recommendations of the model and provide a cement sheath with improved remaining capacity. This paper presents the successful mechanically enhanced slurry design, job design, planning and execution on the production section of the well after a Finite Element Analysis was conducted. Post job conditions such as good cement bonds across cemented areas, well production without inter-zonal communication and no annular pressure build up in over 8 years have proven the success of the design and the procedure implemented in these challenging well bore environments. The success of this well has been applied to two additional wells.

Finite element analysis on dental implant[ndash ]supported prostheses without passive fit

2002 ◽  
Vol 11 (1) ◽  
pp. 30-40 ◽  
Author(s):  
Chatchai Kunavisarut ◽  
Lisa A. Lang ◽  
Brian R. Stoner ◽  
David A. Felton
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Element Analysis ◽  
Passive Fit
Sign in / Sign up

Export Citation Format

Share Document