Assessment of technical condition of high-voltage overhead power transmission lines at the stage of their ageing

2021 ◽  
Vol 14 (2) ◽  
pp. 100-107
Author(s):  
E. M. Farhadzadeh ◽  
A. Z. Muradalyiev ◽  
S. A. Muradalyiev ◽  
A. A. Nazarov
Keyword(s):  
Power Systems ◽  
Electric Power ◽  
Transmission Lines ◽  
Power Transmission ◽  
Operational Reliability ◽  
Technical Condition ◽  
Weak Links ◽  
Power Transmission Lines ◽  
Nonlinear Growth ◽  
Overhead Power Transmission Lines

The organization of operation, maintenance and repair of the basic technological facilities of electric power systems (EPS), which are beyond their designed service life (hereinafter referred to as ageing facilities, or AFs) is one of the problems that determine the energy security of many countries, including economically developed nations. The principal cause of insufficient overall performance of AFs is the traditional focus of the EPS management on economic efficiency and the insufficient attention to reliability and safety of AFs. The tendency to nonlinear growth in the frequency of occurrence of unacceptable consequences in the EPS requires ensuring the operational reliability and safety of AFs. The averaged estimates of reliability and safety used at designing power facilities are not suitable for characterization of overall operational performance. Among the basic and the least investigated (in terms of operational reliability and safety) EPS facilities are overhead power transmission lines (OPL) with a voltage of 110 кV and above. This is for a reason. OPL are electric power facilities with elements distributed along a multi-kilometer line (supports, insulators, wires, accessories, etc.). That is what makes the organization of continuous monitoring of the technical condition of each of these elements, and, consequently, the assessment of operational reliability and safety, so problematic. A method is suggested for assessment of “weak links” among the operated OPL on operative intervals of time along with a method for assessment of the technical condition of OPL at examination of a representative sample.

scholarly journals Automated Analysis of Service Life of Air-Lines of the Electricity Transmission of Electric Power Systems

2021 ◽  
Vol 64 (5) ◽  
pp. 435-445
Author(s):  
E. M. Farhadzadeh ◽  
A. Z. Muradaliyev ◽  
S. A. Abdullayeva ◽  
A. A. Nazarov
Keyword(s):  
Service Life ◽  
Power Systems ◽  
Electric Power ◽  
Transmission Lines ◽  
Quantitative Assessment ◽  
Power Transmission ◽  
Thermal Power ◽  
Electric Power Systems ◽  
Power Transmission Lines ◽  
Overhead Power Transmission Lines

Basic EPS objects, which service life has exceeded normative value, increasingly affect – every year to a greater extent – the efficiency of overall performance. This manifests itself in increase of a number of automatic emergency shutdowns, an amount and complexities of accident-hazardous defects. After the expiration of the standard service life, there is a special need for a quantitative assessment of reliability and safety of an object. It is recommended to organize the operation, maintenance and repair of these objects according to their technical condition, and since it determines the reliability and safety of the object, these properties should be taken into account more fully. The relevant recommendations in electric power systems are implemented at a qualitative level, intuitively, according to the operating experience. There are neither quantitative evaluations nor methodology for their performance. Therefore, a method and algorithm of quantitative assessment of integral indicators of reliability and safety of operation of thermal power units of thermal power plants as concentrated objects of continuous operation were previously analyzed by the authors. The present paper examines distributed objects of continuous operation, viz. overhead power transmission lines with a voltage of 110 kV and higher, whose service life exceeds the standard value. Attention is paid to the issues of quantitative assessment of the degree of aging for a set of overhead power transmission lines, classification of these lines to identify the most significant classes and methodology for assessing the difference in the degree of aging when classifying them according to specified types of signs (for example, the difference in the degree of aging of overhead power transmission lines of grid enterprises of electric power systems). It is shown that it unacceptable to use the estimates of the relative number of overhead power transmission lines, the service life of which exceeds the calculated one, for comparison since it causes a great risk of an erroneous decision. The methodology and algorithm of methodological support of the management of electric power systems and grid enterprises in the organization of operation, maintenance and repair have been developed.

scholarly journals Economic aspects of ensuring the capacity adequacy of electric power systems

2018 ◽  
Vol 58 ◽  
pp. 01010 ◽  
Author(s):  
Nikolay Belyaev ◽  
Andrey Egorov ◽  
Nikolay Korovkin ◽  
Vladimir Chudny
Keyword(s):  
Power Systems ◽  
Electric Power ◽  
Transmission Lines ◽  
Computational Models ◽  
Power Transmission ◽  
Present Report ◽  
Electric Power Systems ◽  
Power Transmission Lines ◽  
Engineering Measures ◽  
The Cost

The present report deals with economic issues of selecting means ensuring the capacity adequacy of electric power systems. Cost analysis of various engineering measures ensuring the capacity adequacy has been performed, they are as follows: construction of margin generating capacities, erection of new power transmission lines or increase of transmission capacity of existing power lines. The cost-based analysis has been conducted following investment programs and regulatory acts in place. Recommendations on developing computational models of power systems have been given based on the results obtained in order to assess the capacity adequacy indices with account made for the cost of various engineering measures to be taken for their improvement.

scholarly journals Calculation of thermal field and ampacity of overhead power transmission lines using finite element method

2014 ◽  
Vol 17 (1) ◽  
pp. 16-29
Author(s):  
Long Van Hoang Vo ◽  
Tu Phan Vu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Transmission Lines ◽  
Power Transmission ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Thermal Fields ◽  
Overhead Power Transmission Lines ◽  
Transmission And Distribution ◽  
Element Method

The population explosion and development of the national economy are two main causes of increasing the power demand. Besides, the Distributed Generations (DG) connected with the power transmission and distribution networks increase the transmission power on the existing lines as well. In general, for solving this problem, power utilities have to install some new power transmission and distribution lines. However, in some cases, the install of new power lines can strongly effect to the environment and even the economic efficiency is low. Nowadays, the problem considered by scientists, researchers and engineers is how to use efficiently the existing power transmission and distribution lines through calculating and monitoring their current carrying capacity at higher operation temperature, and thus the optimal use of these existing lines will bring higher efficiency to power companies. Generally, the current carrying capacity of power lines is computed based on the calculation of their thermal fields illustrated in IEEE [1], IEC [2] and CIGRE [3]. In this paper, we present the new approach that is the application of the finite element method based on Comsol Multiphysics software for modeling thermal fields of overhead power transmission lines. In particular, we investigate the influence of environmental conditions, such as wind velocity, wind direction, temperature and radiation coefficient on the typical line of ACSR. The comparisons between our numerical solutions and those obtained from IEEE have been shown the high accuracy and applicability of finite element method to compute thermal fields of overhead power transmission lines.

Relay protection and automation of electric power systems

2021 ◽  
Author(s):  
Sergey Goremykin
Keyword(s):  
Power Systems ◽  
Electric Power ◽  
Transmission Lines ◽  
Power Supply ◽  
Power Transmission ◽  
Relay Protection ◽  
Electrical Equipment ◽  
Electric Power Systems ◽  
Federal State ◽  
Advantages And Disadvantages

The textbook describes the main issues of the theory of relay protection and automation of electric power systems. The structure and functional purpose of protection devices and automation of power transmission lines of various configurations, synchronous generators, power transformers, electric motors and individual electrical installations are considered. For each of the types of protection of the above objects, the structure, the principle of operation, the order of selection of settings are given, the advantages and disadvantages are evaluated, indicating the scope of application. The manual includes material on complete devices based on semiconductor and microprocessor element bases. The progressive use of such devices (protection of the third and fourth generations) is appropriate and effective due to their significant advantages. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students in the areas of training 13.03.02 "Electric power and electrical engineering" (profile "Power supply", discipline "Relay protection and automation of electric power systems") and 35.03.06 "Agroengineering" (profile "Power supply and electrical equipment of agricultural enterprises", discipline "Relay protection of electrical equipment of agricultural objects"), as well as for graduate students and specialists engaged in the field of electrification and automation of industrial and agrotechnical objects.

Sign in / Sign up

Export Citation Format

Share Document