scholarly journals PERBANDINGAN ANTENA MIKROSTRIP ARRAY DUAL BAND DENGAN PENCATUAN MICROSTRIP LINE DAN ELECTROMAGNETICALLY COUPLED (EMC)

Author(s):  
Citra Andrieyani ◽  
Bambang Sumajudin ◽  
Trasma Yunita

Single microstrip antenna has the characteristics of narrow bandwidth and small gain. This paper discusses the design of a microstrip array antenna that works at two working frequencies, namely 2.4 GHz and 5 GHz for WiFi. The method used to obtain dual band frequencies is by adding slots on the side of the patch. The results obtained are the 4-element microstrip array antenna with feed line supply has better results when applied to WiFi. This feed line antenna has a bandwidth of 75 MHz - 184.4 MHz in accordance with IEEE 802.11n standards and has a gain of 4.321 dBi. Whereas the EMC supply has a large gain of 11.54 dBi but the bandwidth obtained is very narrow, namely 27.5 MHz.

Author(s):  
Mohammad Hamdani

This research discusses the design of the microstrip array antenna with the rosette patch model that works on WLAN 2.4 GHz and 5.2 GHz frequencies which are used for WIFI networks. This microstrip antenna is made using a feedline feed or direct feed with a directional radiation pattern. The initial design used Ansoft HFSS v.13. Software, then fabricated the Microstrip Antenna using a PCB with a single layer FR4 type, and consisted of a patch, substrate, and groundplane. This antenna has dimensions of 94 mm in length and 63.3 mm in width. The measurement results in Laboratorium obtained VSWR 1.6, return loss -12.817, and 31.357 impedance, at a frequency of 2.4 GHz. While at a frequency of 5.2 GHz the VSWR value is 1.292, return loss is -18,210, and impedance is 46.417.  


Author(s):  
Ahmed H. Abdelrahman ◽  
Fatma Elhefnawi ◽  
Atef Z. Elsherbeni ◽  
Moataza Hendi ◽  
Salwa Elramly

Sign in / Sign up

Export Citation Format

Share Document