scholarly journals Computation of Navier-Stokes equations for three-dimensional flow separation

AIAA Journal ◽  
1991 ◽  
Vol 29 (10) ◽  
pp. 1659-1667 ◽  
Author(s):  
Ching-Mao Hung
Keyword(s):  
Flow Separation ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Three Dimensional Flow ◽  
Navier Stokes Equations ◽  
Dimensional Flow

Three-Dimensional Flow and Pressure Patterns in a Hydrostatic Journal Bearing Pocket

1997 ◽  
Vol 119 (4) ◽  
pp. 711-719 ◽  
Author(s):  
M. J. Braun ◽  
M. B. Dzodzo
Keyword(s):  
Journal Bearing ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Flow Regimes ◽  
Axial Direction ◽  
Outward Bound ◽  
Navier Stokes ◽  
Flow Structures ◽  
Three Dimensional Flow ◽  
Navier Stokes Equations

The laminar flow in a hydrostatic pocket is described by a mathematical model that uses the three-dimensional Navier-Stokes equations written in terms of the primary variables, u, v, w, and p. Using a conservative formulation, a finite volume multiblock method is applied through a collocated, body fitted grid. The flow is simulated in a shallow pocket with a depth/length ratio of 0.02. The flow structures obtained and described by the authors in their previous two dimensional models are made visible in their three dimensional aspect for both the Couette, and the jet dominated flows. It has been found that both flow regimes formed central and secondary vortical cells with three dimensional corkscrew-like structures that lead the fluid on an outward bound path in the axial direction of the pocket. In the Couette dominated flow the position of the central vortical cell center is at the exit region of the capillary restrictor feedline, while in the jet dominated flow a flattened central vortical cell is formed in the downstream part of the pocket. It has also been determined that a fluid turn around zone occupies all the upstream space between the floor of the pocket and the runner, thus preventing any flow exit through the upstream exit of the pocket. The corresponding pressure distribution under the shaft for both flow regimes is presented as well. It was clearly established that both for the Couette, and the jet dominated cases the pressure varies significantly in the pocket in the circumferential direction, while its variation is less pronounced axially.

Numerical Simulation of Three-Dimensional Cathode Flow Field of ECM for Inner-Wall Rectangle Weight-Reduction Blind Groove

2010 ◽  
Vol 102-104 ◽  
pp. 321-325 ◽  
Author(s):  
Jian Min Wu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Electrochemical Machining ◽  
Navier Stokes ◽  
Three Dimensional Flow ◽  
Navier Stokes Equations ◽  
Workpiece Surface ◽  
Flow Passage

In order to design the flow field of the NC-Electrochemical Machining (NC-ECM), a three-dimensional physical model of the flow passage is constructed based on the characteristic of the fluid flow, and three-dimensional flow field simulation is conducted with the applications of the Reynolds time-averaged Navier-Stokes equations and standard k- turbulence numerical model, velocity vectors on workpiece surface are calculated respectively based upon the three cathode outlet slots under the steady electrochemical machining condition. The present analysis show that electrolyte insufficiency appeared on workpiece surface for initial cathode flow field, and the experiment results verified the correctness of numerical simulation.

Sign in / Sign up

Export Citation Format

Share Document