ALCOA ALLOY 2090-T83

Alloy Digest ◽  
2000 ◽  
Vol 49 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Density ◽  
Sheet Alloy ◽  
Aerospace Applications ◽  
Aluminum Lithium

Abstract Alcoa alloy 2090-T83 is an aluminum-lithium sheet alloy with a combination of strength, low density, and corrosion resistance. The alloy is used in aerospace applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as joining. Filing Code: AL-371. Producer or source: Alcoa Mill Products Inc.

ALCAN 2098, 2X98 O/T82P

Alloy Digest ◽  
2007 ◽  
Vol 56 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Low Density ◽  
Aerospace Applications ◽  
2024 Alloy

Abstract Alcan 2098 and 2x98 are Al-Cu-Li-Mg-Ag alloys designed to provide a balanced combination of high strength, low density, fatigue resistance, and fracture toughness for aerospace applications. This data sheet covers Alcan 2098 and 2x98 Al-Li fuselage sheets. The O and T82P tempers show improvement over the 2024 alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-405. Producer or source: Alcan Inc.

ALCAN 7449 T7651

Alloy Digest ◽  
2007 ◽  
Vol 56 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Applications

Abstract Alcan 7449 T7651 plates were developed with a better strength/corrosion-resistance balance than the incumbent alloy 7150. Aerospace applications include parts, ribs, and frames. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming and heat treating. Filing Code: AL-406. Producer or source: Alcan Inc.

ALCOA 2099-T86

Alloy Digest ◽  
2017 ◽  
Vol 66 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Low Density

Abstract Alcoa 2099-T86 is a low density, high strength plate alloy available in the T86 temper. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming. Filing Code: Al-450. Producer or source: Alcoa Aerospace and Automotive Products.

2099 T83, T8E67

Alloy Digest ◽  
2005 ◽  
Vol 54 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Lithium Alloy ◽  
Aluminum Lithium Alloy ◽  
Aluminum Lithium

Abstract The aluminum-lithium alloy 2099, also designated C460, was developed for use in aerospace and high-strength applications. The alloy has a lithium addition for lowered density compared to more conventional alloys. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming. Filing Code: AL-398. Producer or source: AEAP-Alcoa Engineered Aerospace Products.

FEDERATED F410

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Aerospace Applications

Abstract FEDERATED F410 is a heat-treatable aluminum sand casting alloy recommended for uses requiring high strength along with toughness and ductility. It has good machinability, fair castability, and is suitable for a number of automotive and aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-210. Producer or source: Federated Metals Corporation, ASARCO Inc..

ALCOA 2099-T83 and 2099-T8E67

Alloy Digest ◽  
2009 ◽  
Vol 58 (6) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Lithium Alloy ◽  
Aerospace Applications ◽  
Aluminum Lithium Alloy ◽  
Aluminum Lithium

Abstract ALCOA 2099 is an aluminum-lithium alloy developed for aerospace applications. Lithium lowers the density. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as forming. Filing Code: AL-422. Producer or source: AEAP-Alcoa Engineered Aerospace Products.

UGI 4057 AIR

Alloy Digest ◽  
2016 ◽  
Vol 65 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Aerospace Applications

Abstract UGI 4057 Air is a carbon martensitic stainless steel with nickel for aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1247. Producer or source: Schmolz + Bickenbach USA Inc..

IncoMAP Alloy Al-905XL

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Density

Abstract IncoMAP alloy A1-905XL is a low density aluminum alloy designed to replace alloy 7075-T73 in forgings where weight is critical. Its density is 8% less than that of alloy 7075-T73. Heat treatment is not required to develop its strength. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-295. Producer or source: Inco Alloys International Inc..

ALCAN 2195 T8R78

Alloy Digest ◽  
2008 ◽  
Vol 57 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Applications ◽  
Temperature Performance ◽  
Weldable Alloy ◽  
Damage Tolerant

Abstract Alcan 2195 T8R78 is an addition to the Weldalite Al-Cu-Li-Ag-Mg-Zr family of alloys. It is a highly damage tolerant weldable alloy for aerospace applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: AL-410. Producer or source: Alcan Inc.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

Sign in / Sign up

Export Citation Format

Share Document