KONSTANTAN

Alloy Digest ◽  
2010 ◽  
Vol 59 (10) ◽  
Keyword(s):  
Electrical Resistivity ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Resistance Alloy ◽  
Very Low Temperature

Abstract Konstantan is an electrical resistance alloy with a very low temperature coefficient of electrical resistivity. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: CU-791. Producer or source: ThyssenKrupp VDM GmbH.

NIKROTHAL 8

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Resistance Alloy ◽  
Lower Temperature ◽  
Continuous Use

Abstract NIKROTHAL 8 is a nickel-chromium electrical-resistance alloy for use in appliances and industrial furnaces. Its maximum recommended element temperature in continuous use is 1200 C (2190 F). Nikrothal 8 is non-magnetic, highly resistant to corrosion, and has a lower temperature coefficient of electrical resistance than other alloys for heating elements. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-268. Producer or source: The Kanthal Corporation.

EVANOHM

Alloy Digest ◽  
1960 ◽  
Vol 9 (4) ◽  
Keyword(s):  
Electrical Resistivity ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Base Alloy ◽  
Nickel Base Alloy ◽  
Temperature Coefficient Of Resistance ◽  
High Electrical Resistivity ◽  
Nickel Base

Abstract EVANOHM is a nickel-base alloy having low temperature coefficient of resistance and high electrical resistivity. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on joining. Filing Code: Ni-57. Producer or source: Wilbur B. Driver Company.

EVANOHM ALLOY S

Alloy Digest ◽  
1989 ◽  
Vol 38 (7) ◽  
Keyword(s):  
Electrical Resistivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Electromotive Force ◽  
Temperature Coefficient Of Resistance ◽  
Resistance Wire ◽  
High Electrical Resistivity ◽  
Optimum Stability

Abstract EVANOHM alloy S offers optimum stability and flexibility with regard to both size and required temperature coefficient of resistance. Its extremely low electromotive force vs copper together with its high electrical resistivity are highly desirable properties in a precision resistance wire. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-373. Producer or source: Wilbur B. Driver Company.

ISO-ELASTIC

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Modulus Of Elasticity ◽  
Heat Treating ◽  
Precision Instrument ◽  
Iron Nickel

Abstract ISO-ELASTIC is an iron-nickel alloy having low temperature coefficient of the modulus of elasticity. It is suitable for precision instrument springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Fe-14. Producer or source: John Chatillon & Sons.

MONEL ALLOY 401

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Heat Treating ◽  
High Electrical Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract MONEL alloy 401 is a copper-nickel alloy with high electrical resistance and is used primarily in specialized electrical and electronic applications. It has a negligible temperature coefficient of electrical resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-216. Producer or source: Huntington Alloy Products Division.

MANGANIN 13

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Temperature Curve

Abstract Manganin 13 is one of a family of resistance alloys with moderate resistivity and a low temperature coefficient. The resistance/temperature curve is not as flat as the constantan alloys nor are the corrosion resistance properties as good. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming. Filing Code: CU-742. Producer or source: Carpenter Specialty Alloys.

TECHALLOY FECRALLOY A

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Standard Equipment ◽  
Resistance Alloy ◽  
Useful Life ◽  
Iron Chromium

Abstract TECHALLOY FECRALLOY A is a new, flexible iron-chromium-aluminum electrical-resistance alloy for heating elements. It greatly resists embrittlement and oxidation; in fact, it has outstanding resistance in air and other hot oxidizing gases to 2372 F (1300 C). Its useful life is many times longer than that of heating elements made from conventional resistance alloys. The alloy can be formed easily on standard equipment and, if necessary, heating elements can be removed easily and repaired; also, the alloy is so ductile that it can be rewound. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Fe-63. Producer or source: Resistalloy Ltd.

TECHALLOY D

Alloy Digest ◽  
1976 ◽  
Vol 25 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Controlled Atmospheres ◽  
Nickel Chromium ◽  
Resistance Alloy ◽  
Iron Nickel ◽  
Oxidation And Corrosion

Abstract TECHALLOY D is an iron-nickel-chromium electrical-resistance alloy suitable for operating in air up to 1400-1600 F. It resists heat, oxidation and corrosion to an outstanding degree. It is used as heating elements in industrial furnaces that operate in the temperature range of 1500-1800 F with controlled atmospheres, and in the range 1400-1600 F in air. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-57. Producer or source: Techalloy Company Inc..

TECHALLOY 294

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Wide Range ◽  
Copper Nickel Alloy

Abstract TECHALLOY 294 is a copper-nickel alloy with constant electrical resistance over a wide range of temperatures. It is used widely in rheostats and controls where the maximum operating temperature does not exceed 1000 F. Its low temperature coefficient of electrical resistance and its stability make it highly useful in sizes for instruments and resistors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-301. Producer or source: Techalloy Company Inc..

CHROMIC-C

Alloy Digest ◽  
1967 ◽  
Vol 16 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Resistance Alloy

Abstract CHROMIC-C is a nickel-chromium-iron electrical resistance alloy recommended for use in applications where the maximum operating temperature does not exceed 1700 F (927 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-122. Producer or source: H. K. Porter Company Inc., Fabricated Metals Division.

Sign in / Sign up

Export Citation Format

Share Document