MONEL ALLOY 401

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Heat Treating ◽  
High Electrical Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract MONEL alloy 401 is a copper-nickel alloy with high electrical resistance and is used primarily in specialized electrical and electronic applications. It has a negligible temperature coefficient of electrical resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-216. Producer or source: Huntington Alloy Products Division.

DRIVER 180 ALLOY

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract DRIVER 180 ALLOY is a copper-nickel alloy for use where moderate electrical resistance is required. The number designation refers to its specific resistivity (180 ohms/cir mil/ft) which is combined with a fairly low coefficient of resistance (180 x 10^-6 per C). Its maximum recommended operating temperature is 1000 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-348. Producer or source: Wilbur B. Driver Company.

ADVANCE

Alloy Digest ◽  
1956 ◽  
Vol 5 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Temperature Coefficient Of Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract ADVANCE is a copper-nickel alloy having high electrical resistance, negligible temperature coefficient of resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Cu-40. Producer or source: Driver-Harris Company.

TECHALLOY 294

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Wide Range ◽  
Copper Nickel Alloy

Abstract TECHALLOY 294 is a copper-nickel alloy with constant electrical resistance over a wide range of temperatures. It is used widely in rheostats and controls where the maximum operating temperature does not exceed 1000 F. Its low temperature coefficient of electrical resistance and its stability make it highly useful in sizes for instruments and resistors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-301. Producer or source: Techalloy Company Inc..

ISO-ELASTIC

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Modulus Of Elasticity ◽  
Heat Treating ◽  
Precision Instrument ◽  
Iron Nickel

Abstract ISO-ELASTIC is an iron-nickel alloy having low temperature coefficient of the modulus of elasticity. It is suitable for precision instrument springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Fe-14. Producer or source: John Chatillon & Sons.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

DRIVER 90 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (11) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract DRIVER 90 ALLOY is a copper-nickel alloy for use where only moderately low electrical resistance is required. The number designations refers to its specific resistivity (90 ohms/cir mil/ft) which is combined with a moderate coefficient of resistance. Its maximum recommended operating temperature is 800 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and heat treating. Filing Code: Cu-343. Producer or source: Wilbur B. Driver Company.

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

OLIN ALLOY C72200

Alloy Digest ◽  
2006 ◽  
Vol 55 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Olin Alloy C72200 is a chromium-containing copper-nickel alloy used extensively in seawater. The alloy is used for its corrosion-erosion resistance and is often called Cupronickel with Cr. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-745. Producer or source: Olin Brass.

CUPRO NICKEL 30%

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract CUPRO-NICKEL 30% is a copper-nickel alloy having high strength, ductility and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-70. Producer or source: American Brass Company.

DRIVER 60 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Temperature Coefficient Of Resistance ◽  
Copper Nickel Alloy

Abstract DRIVER 60 ALLOY is a copper-nickel alloy for use where fairly low electrical resistance is required. The number designation corresponds to its specific resistivity (60 ohms/cir mil/ft) which is combined with a fairly high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-339. Producer or source: Wilbur B. Driver Company.

Sign in / Sign up

Export Citation Format

Share Document