UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

ELEKTRON QH21A

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Casting Alloy ◽  
Casting Alloys ◽  
Temperature Performance

Abstract ELEKTRON QH21A is a magnesium-base casting alloy developed to meet the ever increasing requirements for casting alloys to operate at elevated temperatures. It is of particular interest to designers and stress engineers for highly stressed components operating at temperatures up to 480 F (250 C), especially where pressure tightness is a requirement. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-72. Producer or source: Magnesium Elektron Inc..

ENDURO 19-9SMo

Alloy Digest ◽  
1968 ◽  
Vol 17 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Thermal Treatment ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract ENDURO 19-9-SMo is a 19-9 type stainless steel containing molybdenum to greatly increase its resistance to attack by most chemicals. It is nonmagnetic and does not respond to thermal treatment for hardening. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-207. Producer or source: Republic Steel Corporation.

ALLEGHENY LUDLUM ALLOY S-590

Alloy Digest ◽  
1956 ◽  
Vol 5 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLOY S-590 is designed for service in the range of 1100-1400 F for applications where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-39. Producer or source: Allegheny Ludlum Corporation.

OFHC COPPER

Alloy Digest ◽  
1964 ◽  
Vol 13 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Conductivity ◽  
Ofhc Copper ◽  
Temperature Performance

Abstract OFHC copper is a high conductivity, oxygen free grade of copper furnished in two grades, namely, Regular Grade and Certified Grade. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-144. Producer or source: American Metal Climax Inc..

ENDURO 18-8-SCb

Alloy Digest ◽  
1960 ◽  
Vol 9 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Intergranular Attack ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract ENDURO 18-8-SCb is an 18-8 type stainless steel stablized by columbium for increased resistance to intergranular attack. It is recommended for heavy welded equipment and for service within the range of 800-1650 F when corrosive conditions exist. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-106. Producer or source: Republic Steel Corporation.

HYLITE 40

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Manganese Alloy ◽  
Temperature Performance ◽  
Titanium Aluminum

Abstract HYLITE 40 is a titanium-aluminum-manganese alloy of high strength with excellent properties as forgings and bar stock. It is recommended for compressor dises and blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-34. Producer or source: Jessop-Saville Ltd, Brightside Works.

REM-CRU A-70

Alloy Digest ◽  
1958 ◽  
Vol 7 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bearing Strength ◽  
Temperature Performance

Abstract REM-CRU A-70 is the grade of unalloyed titanium used where higher strength is required. It is specified for many moderately stressed aircraft parts. (Formerly known as RC-70.) This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-16. Producer or source: Rem-Cru Titanium Inc..

Sign in / Sign up

Export Citation Format

Share Document