Two-dimensional MXenes for electrochemical energy storage applications

Since the discovery of Ti3C2Tx in early 2011, a newly emerging family of post-graphene two-dimensional transition metal carbides and nitrides (MXenes) has been rigorously investigated owing to their high conductivity....

Natural Fractures Characteristics of the Carboniferous Volcanic Reservoir in Northwestern Margin of Junggar Basin

Research on the regional fracture’s development is important for reservoir fracturing. This paper takes the Carboniferous volcanic reservoir in the northwestern margin of Junggar Basin as the research object. Based on understanding the regional tectonic faults and geological characteristics, the parameter characteristics of natural fractures are analyzed using imaging logging data, and natural fractures distribution characteristics are compared with regional faults and in-situ stresses, as well as the pattern of natural fractures formation is revealed. The results indicated that: (1) The Carboniferous in the northwestern margin of Junggar Basin area mainly develops 3 NE-trending reverse faults. The reservoir type is pore-fracture dual media type, with an average porosity of 7.64% and an average permeability of 1.16mD, which belongs to the medium-porosity and ultra-low permeability reservoir; (2) Reservoir fractures are generally well developed. High-conductivity fractures and high-resistance fractures coexist, but high-conductivity fractures are the main ones. The fracture width is between 0.053 and 0.23 mm, and the fracture density is between 0.5 and 1.68 strips/m. The length is between 0.54-1.88m, the fracture porosity is between 3.4×10-5-41×10-5, and the dominant fracture trend is mainly NE50°-NE80°; (3) The direction of the maximum horizontal in-situ stress of the reservoir is mainly NE30°-NE60°, in the direction of NEE, it differs from fracture strike by 10°-50°, and roughly the same as the strike of the three reverse faults.