MELTRON AZ855

Alloy Digest ◽  
1956 ◽  
Vol 5 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Fatigue Endurance

Abstract MELTRON AZ855 is a magnesium forging alloy recommended for large forgings requiring high tensile strength, fatigue endurance and ductility, combined with good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-24. Producer or source: Aluminum Laboratories Ltd.

NICKEL COPPER CAST ALLOY 410

Alloy Digest ◽  
1963 ◽  
Vol 12 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Cast Alloy ◽  
Heat Treating ◽  
High Alloy ◽  
Temperature Performance ◽  
Nickel Copper

Abstract Nickel Copper Cast Alloy 410 is one of the most useful cast materials to withstand corrosives encountered in industry. It has tensile strength comparable to cast carbon steel and gives good performance under conditions of abrasion and erosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-85. Producer or source: High alloy foundries.

AISI TYPE 301

Alloy Digest ◽  
1957 ◽  
Vol 6 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Cold Working ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI TYPE 301 is an austenitic 17-7 type chromium nickel stainless steel capable of attaining high tensile strength with good ductility by moderate or severe cold working. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-54. Producer or source: Stainless steel foundries.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

WALLEX No. 40

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Red Hardness ◽  
Cobalt Base

Abstract WALLEX No. 40 is a self-fluxing, cobalt-base hard-surfacing alloy with excellent resistance to a combination of corrosion and abrasion and relatively good impact properties. It has excellent red hardness and weldability. It is supplied only as atomized powder for application with Wall Colmonoy's SPRAYWELD and FUSEWELD processes. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: Co-74. Producer or source: Wall Colmonoy Corporation.

SILVER-MAGNESIUM-NICKEL

Alloy Digest ◽  
1956 ◽  
Vol 5 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Unique Combination ◽  
Temperature Performance ◽  
Silver Magnesium

Abstract SILVER-MAGNESIUM-NICKEL is a hardenable silver-base alloy that offers a unique combination of properties for electrical and electronic use. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ag-2. Producer or source: Handy & Harman.

VASCO 9-4-20

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
High Temperature ◽  
Ultimate Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance

Abstract Vasco 9-4-20 (0.20 wt% C) is a premium quality aircraft steel that combines high tensile strength with good fracture toughness. It is a heat-treatable alloy capable of developing an ultimate tensile strength greater than 190 ksi. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: SA-489. Producer or source: Vasco, An Allegheny Teledyne Company.

CRONIFER 2328

Alloy Digest ◽  
1982 ◽  
Vol 31 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Good Resistance ◽  
High Chromium ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
High Nickel

Abstract CRONIFER 2328 is a titanium-stabilized, high-chromium and high-nickel austenitic stainless steel with additions of molybdenum and copper. It exhibits good corrosion resistance against sulfuric and phosphoric acids. Also, it has good resistance against pitting and stress-corrosion cracking. Cronifer 2328 is used widely in the chemical industry for equipment and for the storage and transportation of various acids and solutions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-411. Producer or source: Vereingte Deutsche Metallwerke AG.

BERYLCO 275CR

Alloy Digest ◽  
1956 ◽  
Vol 5 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract Berylco 275CR is a heat treatable beryllium copper casting alloy having high strength and hardness, and excellent corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-35. Producer or source: Beryllium Corporation.

COLMONOY No. 62SA

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Temperature Performance ◽  
Nickel Base

Abstract COLMONOY No. 62SA comprises a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat and galling. Colmonoy No. 62SA is supplied as atomized powder for application with Wall Colmonoy's SPRAYWELD Process. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-205. Producer or source: Wall Colmonoy Corporation.

WALLEX No. 6

Alloy Digest ◽  
1964 ◽  
Vol 13 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Corrosion And Oxidation

Abstract Wallex No. 6 is a cobalt-base alloy recommended for hard facing parts to resist impact, corrosion and oxidation at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, and deformation. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-36. Producer or source: Wall Colmonoy Corporation.

Sign in / Sign up

Export Citation Format

Share Document