URANUS 800 HT

Alloy Digest ◽  
1996 ◽  
Vol 45 (10) ◽  
Keyword(s):  
Grain Size ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Sigma Phase ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract Uranus 800 HT is a variant of a high chromium and nickel austenitic alloy that combines good corrosion and creep resistance. The alloy is solution annealed to produce a large grain size and remains stable, not being embrittled by the precipitation of sigma phase. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-655. Producer or source: Creusot-Marrel.

NICROFER 3033

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance ◽  
Mineral Acids ◽  
Mixed Acids

Abstract Nicrofer 3033 is a high-chromium austenitic material for service in hot mineral acids and mixed acids. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-508. Producer or source: VDM Technologies Corporation. Originally published April 1996, revised February 2004. See also Alloy Digest SS-687, July 1997.

CALITE B-29

Alloy Digest ◽  
1958 ◽  
Vol 7 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
High Chromium ◽  
Heat Resistant ◽  
Temperature Performance

Abstract CALITE B-29 is a high chromium-nickel heat resistant casting alloy having excellent oxidation and carburization resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-76. Producer or source: Calorizing Company.

UNILOY 1430MV

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract UNILOY 1430MV is a high-chromium, molybdenum heat and corrosion resisting steel used for highly stressed parts involving service temperatures up to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-102. Producer or source: Cyclops Corporation.

UNITEMP 1430MV

Alloy Digest ◽  
1967 ◽  
Vol 16 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract UNITEMP-1430MV is a martensitic high-chromium, molybdenum heat and corrosion resisting steel used for highly stressed parts involving service temperatures up to 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-199. Producer or source: Cyclops Corporation.

ALLEGHENY LUDLUM 430F

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance

Abstract ALLEGHENY LUDLUM 430F is a low carbon, high chromium ferritic stainless steel with good machinability and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-277. Producer or source: Allegheny Ludlum Corporation.

UCI-190

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Metal ◽  
Creep Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Steam Cracking

Abstract UCI-190 (HP) material is a general-purpose alloy for use in steam-cracking tubes and fittings and reformer furnaces. HP alloy has carburization, oxidation, and creep resistance at temperatures up to 2000 F. The alloy is weldable by GTAW, GMAW, and SMAW using electrodes with composition matching the base metal (25Cr-35Ni) or NiCrCoMo-1 (AWS 5.11 and AWS 5.14). Preheat or post heat normally are not required. UCI-190 has been used for many years providing consistent and predictable results in high-temperature applications. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-689. Producer or source: Ultra-Cast Inc.

CIMET

Alloy Digest ◽  
1960 ◽  
Vol 9 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract CIMET is a low nickel, high chromium-iron alloy suitable for sulfur-bearing fuel applications. It is resistant to heat, corrosion, and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-107. Producer or source: Driver-Harris Company.

Ti-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Good Combination ◽  
Surface Stability ◽  
Temperature Performance

Abstract Ti-11 is a super alpha litanium alloy with excellent properties up to at least 1000 F; it has useful properties as high as 1100 F. It offers a good combination of creep resistance and metallurgical and surface stability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-69. Producer or source: Titanium Metals Corporation of America.

LAPELLOY C

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
High Chromium ◽  
Temperature Performance

Abstract LAPELLOY C is a high-chromium, molybdenum heat and corrosion resistant steel used for highly stressed parts involving service temperatures up to 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-81. Producer or source: Carpenter.

X-ITE

Alloy Digest ◽  
1956 ◽  
Vol 5 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
High Chromium ◽  
Temperature Performance

Abstract X-ITE is a high chromium-nickel casting alloy having high resistance to corrosion, heat and abrasion. It corresponds to A.C.I. Type HU alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-40. Producer or source: General Alloys Company.

Sign in / Sign up

Export Citation Format

Share Document