CARPENTER MICRO-MELT A11-LVC

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Micro-Melt A11-LVC is a high-vanadium tool steel produced by the Carpenter Micro-Melt powder process. It provides higher toughness than Carpenter Micro-Melt A11 (Alloy Digest TS-571, January 2000) with lower wear resistance. It is used where slightly less wear resistance than that of Micro-Melt A11 is acceptable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-573. Producer or source: Carpenter.

THERMOLD H13

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H13 (formerly Thermold AV) is an air-hardening hot-work tool steel having good wear resistance and hot hardness at elevated temperature. Uniforged Rounds of THERMOLD H13 were developed especially for critically stressed extrusion tools and other hot-work tooling applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-241. Producer or source: Cyclops Corporation.

UDDEHOLM QRO 80 MICRODIZED

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Improved Performance

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.

MILNE CMV

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Tool Steel ◽  
Compression Strength ◽  
Heat Treating ◽  
Medium Carbon ◽  
Temperature Performance

Abstract Milne CMV is a 5% chromium, medium-carbon hot work tool steel, having high compression strength, wear resistance, and corrosion resistance. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-111. Producer or source: A. Milne & Company (Distributor).

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

JESSOP-SAVILLE H.50

Alloy Digest ◽  
1967 ◽  
Vol 16 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract Jessop-Saville H.50 is an air or oil hardening hot work tool steel recommended for die casting dies, hot punches, shear blades and pressing tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-189. Producer or source: Jessop-Saville Ltd, Brightside Works.

ORION

Alloy Digest ◽  
1957 ◽  
Vol 6 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Wear Resistant ◽  
Temperature Performance ◽  
Strength And Toughness

Abstract Orion is a chromium-vanadium tool steel generally used where strength and toughness are of greater importance than extreme hardness. It is relatively shallow hardening, tough, and wear resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TS-54. Producer or source: Cyclops Corporation.

UHB STAVAX ESR

Alloy Digest ◽  
1974 ◽  
Vol 23 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Temperature Performance

Abstract UHB STAVAX ESR is a chromium martensitic stainless tool steel which is Electro-Slag Refined (ESR) to provide the best polishability. It is characterized by (1) excellent polishability, (2) high hardness, (3) good hardenability and (4) fair corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-299. Producer or source: Uddeholm Aktiebolag. See also Alloy Digest SS-331, August 1976.

POTOMAC 2V

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract POTOMAC 2V is a high-carbon, high-vanadium modification of the well-known 5% chromium hot-work tool steel. It has improved wear resistance and the necessary toughness for severe forming applications. It is recommended for such applications as hot dies for extrusions and forgings, piercing points and hot punches. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-280. Producer or source: Allegheny Ludlum Corporation.

CROMO-WV

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Bethlehem Steel Corporation ◽  
Temperature Performance ◽  
Steel Corporation

Abstract Cromo-WV is a 5% chromium-tungsten-vanadium-molybdenum tool steel for all general-purpose hot-work tools and dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-250. Producer or source: Bethlehem Steel Corporation.

THERMOLD H11

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Toughness ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H11 (formerly Thermold A1) is an air-hardening hot-work tool steel having high toughness and hot hardness at elevated temperature. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-243. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document