BÖHLER M261 EXTRA

Alloy Digest ◽  
2015 ◽  
Vol 64 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Compressive Stress ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Steel Grade ◽  
High Wear Resistance ◽  
Hardened Condition

Abstract Böhler (or Boehler) M261 Extra is a precipitation hardening steel grade for plastic molds with good machinability in the precipitation hardened condition. It is used in the processing of plastics by offering high compressive stress and high wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-732. Producer or source: Böhler Edelstahl GmbH & Company KG. See also Alloy Digest TS-736, September 2016.

AL 17-7 PRECIPITATION HARDENING ALLOY

Alloy Digest ◽  
1992 ◽  
Vol 41 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Hardened Condition

Abstract AL 17-7 alloy, a precipitation hardening stainless steel, has moderate corrosion resistant characteristics and develops high strenth in the precipitation hardened condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-528. Producer or source: Allegheny Ludlum Corporation.

LUCEFIN GROUP 16MnCr5 (1.7131), 16MnCrS5 (1.7139)

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Medium Size ◽  
Case Hardening ◽  
Low Carbon

Abstract Lucefin Group 16MnCr5 and 16MnCrS5 are low-carbon, 1.2Mn-1Cr, alloy case-hardening steels that are used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition. In general, these steels are used for small and medium size parts requiring high wear resistance and fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-864. Producer or Source: Lucefin S.p.A.

AIR-4

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Bethlehem Steel Corporation ◽  
Steel Corporation ◽  
Machining Characteristics

Abstract BETHLEHEM AIR-4 is a medium alloy air-hardening tool steel having low deformation, high wear resistance and hardness, deep hardening properties and adequate toughness for severe service. It has excellent free-machining characteristics. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-129. Producer or source: Bethlehem Steel Corporation.

BÖHLER K700

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
North America ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Typical Application ◽  
Nickel Base

Abstract Böhler (or Boehler) K700 is a nickel base alloy for high temperatures that is precipitation hardening. Aerospace engines are a typical application. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: TS-731. Producer or source: Böhler-Uddeholm North America.

NI-VEE TYPE D

Alloy Digest ◽  
1962 ◽  
Vol 11 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
International Nickel Company ◽  
Type D

Abstract NI-VEE Type D is a precipitation hardening leaded-nickel bearing bronze suitable for bearings and acid-resisting castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-55. Producer or source: The International Nickel Company Inc.. Originally published September 1957, revised March 1962.

IMPERIAL

Alloy Digest ◽  
1961 ◽  
Vol 10 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Manganese Steel ◽  
High Wear Resistance ◽  
High Carbon ◽  
High Manganese ◽  
High Manganese Steel ◽  
Steel Works

Abstract IMPERIAL is a high-carbon, high manganese steel of great toughness and high wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-113. Producer or source: Edgar Allen & Company Ltd, Imperial Steel Works.

SUPER NITRALLOY

Alloy Digest ◽  
1970 ◽  
Vol 19 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance ◽  
Core Hardness

Abstract SUPER NITRALLOY is a precipitation hardening grade of nitriding steel designed primarily for high core hardness and toughness. It is recommended for parts requiring fatigue and wear resistance, such as cams, gears and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-252. Producer or source: Latrobe Steel Company.

CYCLOPS S1

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Core Strength ◽  
Major Factors ◽  
Pneumatic Tool

Abstract CYCLOPS S1 (formerly Alco M) was originally developed for chisel and pneumatic tool purposes. It is now used for many other cold and hot work applications because of its outstanding toughness and resistance to fatigue. It gives excellent results in those instances where shock and impact are major factors. It may be carburized for those applications where high wear resistance and great core strength are required. Its many applications include shear blades, rivet busters and forging dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-352. Producer or source: Cyclops Corporation.

BÖHLER M461 EXTRA

Alloy Digest ◽  
2015 ◽  
Vol 64 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Precipitation Hardening ◽  
Steel Grade ◽  
Hardened Condition

Abstract Böhler (or Boehler) M461 Extra is a precipitation hardening steel grade for plastic molds with good machinability in the precipitation hardened condition. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on machining. Filing Code: TS-730. Producer or source: Böhler Edelstahl GmbH & Company KG.

TOUGHTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Cold Work Tool Steel

Abstract Toughtec SF is a spray-formed cold-work tool steel offering a combination of high wear resistance and very good ductility. Toughtec SF is suitable for the production of hot shearing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-648. Producer or source: Böhler-Uddeholm North America.

Sign in / Sign up

Export Citation Format

Share Document