UDDEHOLM SVERKER 3

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Abrasive Wear ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Tungsten Alloy ◽  
High Carbon ◽  
Long Run ◽  
Cold Work Tool Steel

Abstract Uddeholm Sverker 3 is a high-carbon, chromium-tungsten, alloy cold-work tool steel. It is suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Uddeholm Sverker 3 contains large carbides, which are advantageous for abrasive wear resistance but which reduce chipping resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-797. Producer or Source: Uddeholms AB.

BÖHLER K107

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Tungsten Alloy ◽  
High Carbon ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Böhler K107 is a high-carbon (2.1%), 12% chromium. 0.7 % tungsten, alloy cold-work tool steel that is used in applications where a very high abrasive wear resistance is needed, but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-799. Producer or source: voestalpine Böhler Edelstahl GmbH&Co KG.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2080

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2080 is a high-carbon (2%), high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-792. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

BÖHLER K100

Alloy Digest ◽  
2020 ◽  
Vol 69 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Cold Work Tool Steel

Abstract Böhler K100 is a high-carbon, high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and machining. Filing Code: TS-788. Producer or source: voestalpine Böhler Edelstahl GmbH & Co.

UDDEHOLM VANADIS 8 SUPERCLEAN

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
High Carbon ◽  
Long Run ◽  
Powder Metallurgy Process ◽  
Cold Work Tool Steel ◽  
Metallurgy Process ◽  
Very High

Abstract Uddeholm Vanadis 8 SuperClean is a high-carbon, Cr-Mo-V, alloy cold work tool steel that is produced by the powder metallurgy process. It is suitable for very long run tooling where a combination of very high wear resistance and good chipping resistance is required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-804. Producer or source: Uddeholms AB (a voestalpine company).

INDUSTEEL TENASTEEL

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Vanadium Alloy ◽  
Tool Steels ◽  
High Carbon ◽  
Cold Work Tool Steel

Abstract Industeel Tenasteel is a high-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is specially designed to replace Type D2 and X153CrMoV12 (1.2379) cold work tool steels in applications requiring high wear resistance and very good toughness. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-795. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

INDUSTEEL D2

Alloy Digest ◽  
2020 ◽  
Vol 69 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Hardenability ◽  
High Chromium ◽  
Cold Work Tool Steel ◽  
D3 Tool Steel

Abstract Industeel D2 is an air-hardening, high-carbon (1.5%), high-chromium (12%), alloy cold-work tool steel that also contains molybdenum and vanadium. It is specifically designed to provide high abrasive wear resistance and high hardenability. This grade can be used for cutting and deformation tools submitted to high abrasive wear. It can be used when Type D3 tool steel shows an excessive sensitivity to cracking or chipping. This datasheet provides information on composition, physical properties, hardness, and elasticity. Filing Code: TS-791. Producer or source: Industeel France (a subsidiary of ArcelorMittal.

CRUCIBLE AIRDI 150

Alloy Digest ◽  
2020 ◽  
Vol 69 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Cold Work Tool Steel

Abstract Crucible Airdi 150 is an air-hardening, high-carbon (1.5%), high-chromium (12%), alloy cold work tool steel that also contains molybdenum and vanadium. It is suitable for applications that require very good abrasive wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on machining and joining. Filing Code: TS-790. Producer or source: Crucible Industries LLC.

SANDVIK APM 2730

Alloy Digest ◽  
2019 ◽  
Vol 68 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2235

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cutting Edge ◽  
High Carbon ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2235 is a high-carbon, Cr-V, alloy cold-work tool steel that has medium hardenability and is suitable for short-run tooling requiring a combination of good wear resistance and toughness, and a keen cutting edge. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-811. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UDDEHOLM CALDIE

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Electroslag Remelting ◽  
Vanadium Alloy ◽  
High Carbon ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Uddeholm Caldie is a high-carbon, chromium-molybdenum-vanadium alloy cold-work tool steel that is produced using the electroslag remelting (ESR) process. It is suitable for short and medium run tooling in applications where a combination of very high chipping resistance and compressive strength is required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance. Filing Code: TS-785. Producer or source: Uddeholms AB (a voestalpine company).

Sign in / Sign up

Export Citation Format

Share Document