A methodology for correct measurements of the spatial and energy characteristics of a laser beam is considered, based on the determination of the initial moments of the spatial intensity distribution in the beam cross section. The classification of radiation fields participating in the measuring process is given: emitted, measured and measured. It is shown that ISO 11146:2005 “Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios, Part 1-3” for measuring the spatial and energy characteristics of laser beams leads to incorrect measurements. This is due to the fact that the recommendations for the application of ISO 11146:2005 do not take into account the dynamic range of the used matrix radiation detectors, and the characteristics of the emitted field of interest to the user turn out to be diverging, which violates the uniformity of measurements. Moreover, the conditions ensuring the convergence of the results are practically impracticable. To solve these problems, it is proposed to establish and regulate the lower level of the dynamic range of measurements of the intensity of the used matrix receivers and to consider the spatial and energy characteristics of the emitted field of interest to the user, depending on the set value of the lower level. It is shown that measurements with this methodology become correct and make it possible to compare the characteristics of laser beams obtained by different array detectors. Formulas are given that take into account the effect of the lower level of the dynamic range of the matrix radiation detectors on the measurement result. These formulas should be recommended for inclusion in the updated edition of the national standard GOST R ISO 11146-2008 “Lasers and laser installations (systems). Methods for measuring widths, divergence angles and propagation coefficients of laser beams. Parts 1-3”.
