Review on Transmission Expansion Planning Models

2016 ◽  
Vol 818 ◽  
pp. 129-133
Author(s):  
Ibrahim Alhamrouni ◽  
Azhar Khairuddin ◽  
Mohamed Salem ◽  
Abdelrahman Alnajjar

Transmission expansion planning has become a complicated procedure more than any time it was with the rapid growth of the transmission networks, therefore, this work summarizes the works had been done before regarding this topic. This review classifies the existing works from many sides such as, solution methods, planning horizon and from the modeling prospective in order to facilitate the other researcher’s works in this hot area to get a feasible algorithm academically and commercially. The drawbacks of the TEP procedure and some recommendations are also included.

Author(s):  
Viktor Slednev ◽  
Manuel Ruppert ◽  
Valentin Bertsch ◽  
Wolf Fichtner ◽  
Nico Meyer-Hübner ◽  
...  

Author(s):  
Giovanni Micheli ◽  
Maria Teresa Vespucci ◽  
Marco Stabile ◽  
Cinzia Puglisi ◽  
Andres Ramos

Abstract This paper is concerned with the generation and transmission expansion planning of large-scale energy systems with high penetration of renewable energy sources. Since expansion plans are usually provided for a long-term planning horizon, the system conditions are generally uncertain at the time the expansion plans are decided. In this work, we focus on the uncertainty of thermal power plants production costs, because of the important role they play in the generation and transmission expansion planning by affecting the merit order of thermal plants and the economic viability of renewable generation. To deal with this long-term uncertainty, we consider different scenarios and we define capacity expansion decisions using a two-stage stochastic programming model that aims at minimizing the sum of investment, decommissioning and fixed costs and the expected value of operational costs. To be computationally tractable most of the existing expansion planning models employ a low level of temporal and technical detail. However, this approach is no more an appropriate approximation for power systems analysis, since it does not allow to accurately study all the challenges related to integrating high shares of intermittent energy sources, underestimating the need for flexible resources and the expected costs. To provide more accurate expansion plans for power systems with large penetration of renewables, in our analysis, we consider a high level of temporal detail and we include unit commitment constraints on a plant-by-plant level into the expansion planning framework. To maintain the problem computationally tractable, we use representative days and we implement a multi-cut Benders decomposition algorithm, decomposing the original problem both by year and by scenario. Results obtained with our methodology in the Italian energy system under a 21-year planning horizon show how the proposed model can offer professional guidance and support in strategic decisions to the different actors involved in electricity transmission and generation.


SIMULATION ◽  
2020 ◽  
Vol 96 (7) ◽  
pp. 605-621
Author(s):  
Abdollah Ahmadi ◽  
Hani Mavalizadeh ◽  
Ali Esmaeel Nezhad ◽  
Pierluigi Siano ◽  
Heidar Ali Shayanfar ◽  
...  

This paper presents the application of information gap decision theory (IGDT) to deal with uncertainties associated with load forecasting in dynamic, environment constrained, coordinated generation and transmission expansion planning. Traditionally, the gaseous emissions are constrained over the whole system. Conventional methods cannot guarantee a practical expansion plan since huge emissions can still occur on some buses in the power system. This paper introduces a per-bus emission limit to avoid extreme emissions in highly populated areas. The effect of nodal emission limits is fully discussed and compared to a conventional method. The model is kept linear using the big M approach to decrease the model computational burden. Reliability is considered by limiting the estimated load not served in each year over the planning horizon. The cost of fuel transportation and fuel limits are considered in order to make the model more realistic and practical. The effectiveness of the proposed model is verified by implementation on Garver 6 bus, IEEE 30 bus, and 118 bus test systems.


In power system studies the most important issue is Transmission Expansion Planning (TEP). The intend of TEP problem is to choose the placement as well as number of additional transmission lines, which are to be added to the existing system to suit growing demand in planning horizon. In this paper a new methodology for TEP is proposed, the presented Transmission planning is linked with generation cost, active power loss minimization by considering wind uncertainties. Firstly, the uncertainties involved in wind generation can be determined by using weigbull probability functions. Monte Carlo simulation study is able to be used to find the probability distribution functions of wind generation. Then, in TEP formulation the WTG uncertainties are considered. Particle swarm optimization (PSO) technique is used for solving the proposed single objective optimization problem. Simulation studies conducted on an IEEE 30 bus test system to certify effectiveness of the TEP problem with considering wind uncertainties.


Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1416 ◽  
Author(s):  
Mohammad Navidi ◽  
Seyed Masoud Moghaddas Tafreshi ◽  
Amjad Anvari-Moghaddam

In order to facilitate the transformation of the existing generation and transmission networks’ structure into a scalable and competitive grid structure, this paper introduced regional energy systems (RGESs) that have the role of aggregating distributed energy resources (DERs) and flexible loads. The economic justification for the expansion of sub-transmission networks in the presence of regional energy systems was also investigated. To achieve this goal, multi-criteria optimization solutions were employed to find techno-economic solutions. While solving the proposed multi-criteria optimization problem, a Pareto front was determined to show the tradeoff between the criteria examined. In addition, fuzzy satisfying and the max-min method were used for finding equilibrium point. In order to demonstrate the performance and effectiveness of the proposed model, a realistic sub-transmission system in Guilan Province, Iran, was used as a test system and the results were compared to those from a traditional sub-transmission expansion planning model.


Sign in / Sign up

Export Citation Format

Share Document