Geophysical investigations in support of grout and fill assessments at the Low Sill Control Structure, Old River Control Complex, Louisiana

2021 ◽  
Author(s):  
Janet E. Simms ◽  
Benjamin R. Breland ◽  
William E. Doll ◽  
Jason Greenwood ◽  
Ronald Kaufmann
2021 ◽  
Author(s):  
Janet Simms ◽  
Benjamin Breland ◽  
William Doll

Geophysical surveys, both land-based and water-borne, were conducted at the Old River Control Complex‒Low Sill, Concordia Parish, LA. The purpose of the surveys was to assess the condition of the grout within the scour region resulting from the 1973 flood event, including identification of potential voids within the grout. Information from the ground studies will also be used for calibration of subsequent marine geophysical data and used in stability analysis studies. The water-borne survey consisted of towed low frequency (16-80 MHz) ground penetrating radar (GPR), whereas the land-based surveys used electrical resistivity and seismic refraction. The GPR survey was conducted in the Old River Channel on the upstream side of the Low Sill structure. The high electrical conductivity of the water (~50 mS/m) precluded penetration of the GPR signal; thus, no useful data were obtained. The land-based surveys were performed on both northeast and southeast sides of the Low Sill structure. Both resistivity and seismic surveys identify a layered subsurface stratigraphy that corresponds, in general, with available borehole data and constructed geologic profiles. In addition, an anomalous area on the southeast side was identified that warrants future investigation and monitoring.


2017 ◽  
Author(s):  
Charles Little ◽  
David Biedenharn ◽  
Mead Allison ◽  
Troy McCullough ◽  
Koby Wofford

2013 ◽  
Vol 62 (2) ◽  
pp. 251-265 ◽  
Author(s):  
Piotr J. Serkies ◽  
Krzysztof Szabat

Abstract In the paper issues related to the design of a robust adaptive fuzzy estimator for a drive system with a flexible joint is presented. The proposed estimator ensures variable Kalman gain (based on the Mahalanobis distance) as well as the estimation of the system parameters (based on the fuzzy system). The obtained value of the time constant of the load machine is used to change the values in the system state matrix and to retune the parameters of the state controller. The proposed control structure (fuzzy Kalman filter and adaptive state controller) is investigated in simulation and experimental tests.


Sign in / Sign up

Export Citation Format

Share Document